Switching The Voice Recorder O; Recording Dictation - Silvercrest KH 2450 Operating Instructions Manual

7.2 Switching the voice recorder off
Hold the button »ON/OFF«
The voice recorder then switches itself off.

7.3 Recording dictation

1
Switch the voice recorder on by pressing the button »ON/OFF« once.
As soon as the start screen is shown in the display
2
Place the multi-function slider
3
Then select, by pressing the function button A
now allocates a new dictation reference with a successive number.
‹
]
noTICe:
Every new dictation recording is saved under a new, successive number. However, take note: The numbering
of saved dictations does not subsequently change when you delete individual dictations.
‹
Ú
examPle:
You start a new dictation recording. This is automatically assigned the number »DICT001«. At a later date you
delete dictation recording »DICT001«. When you start a new dictation recording, this one is automatically as-
signed the next following number, »DICT002«, although the dictation with the prior number, »DICT001«, has
been deleted.
You can however reset the dictate counter back to null. After the resetting of the counter, the subsequent dic-
tations will again be automatically successively numbered, beginning at »DICT001«. The resetting of the in-
ternal counter for dictations is explained in chapter 8.13 » Resetting the internal dictation counter«.
However, the dictation recording does not start immediately, instead, at first it is in
a pause-mode. The status lamp »DICT
16
pressed down until »Off« appears in the display
a
at » STOP«.
h
«
d
:
q
, »NEW«. The voice recorder
w
blinks; in the display
.
q
›
›
is indicated:
q