Installing An Ergonomic Video Workstation; Connecting The Monitor - Siemens MCM 17P1 Operating Manual

Installing an ergonomic video workstation

Before you set up your equipment you should select a suitable position for working at the monitor.
Please observe the following advices when installing a video workstation.
Avoid direct and reflected glare. Avoid glare from electric
preferable viewing sector
0° 0°
60°
permissible
viewing sector
permissible viewing sector
Position the monitor for
optimum viewing. The viewing
distance to the monitor should
be approximately 50 cm.

Connecting the monitor

See your PC's operating manual for details of the ports on the system unit.
Please note the information provided in the "Safety" section in the chapter
!
notes" at the beginning of this manual.
Do not cover the ventilation openings of the monitor.
If you are assembling monitors beside each other, there must be a minimum distance of
30 cm between monitors of the same constructional type, to avoid image distortion. With
different monitors, the distance must be increased, if necessary.
A26361-K551-Z100-5-5E19
lighting.
65°
30°
30°
65°
Keep ventilated areas clear.
Color monitor MCM 17P1
edge of desk
permissible
reaching sector
600 mm
Position the keyboard where it
is easiest to reach.
approx. 90°
approx. 90°
and more
Remember to maintain correct
posture.
"Important
permissible
reaching sector
600 mm
English - 7