Flymo EasiLife Operator's Manual page 26

3.10.10 ECO mode
ECO mode is activated, it switches off the signal in the
If
boundary loop, the guide wire and the charging station,
when the product is parked or is charging.
Note:
ECO mode to save energy and avoid
Use
interference with other equipment, for example hearing
loops or garage doors.
Note:
To start the product manually in the work area,
push the STOP button before you remove the product
from the charging station. If not, the product cannot be
started in the work area.
3.10.10.1 To set the ECO mode
To get access to the menu on
1. Do steps 1–3 in
page 21 .
2. Use the arrow buttons and the OK button to move
through the menu structure
> ECO mode .
3. Push the OK button to select the
4. Push the BACK button.
3.10.11 To avoid collisions with Flymo
mower house
If you have installed a Flymo mower house (available
as accessory), the wear on the product and the
mower house decreases when you select
collisions .
To get access to the menu on
1. Do steps 1–3 in
page 21 .
2. Use the arrow buttons and the OK button to move
through the menu structure
> Mower house > Avoid house collisions .
3. Push the BACK button.
Note:
Avoid house collisions is selected it can result
If
in grass that is not cut around the charging station.
3.10.12 FrostSense
The grass is extra sensitive to wear if the yard is
FrostSense is activated, the
covered with frost. If the
product is not allowed to start to cut the grass if the
temperature is below 5° C / 41° F.
Note:
FrostSense is located inside the chassis
The
and there can be a delay compared to the ambient
temperature.
3.10.12.1 To set the FrostSense
1. Do steps 1–3 in To get access to the menu on
page 21 .
26 - Installation
2.
3.
4.
3.10.13 Bluetooth
The product can connect to mobile devices that have
the Flymo EasiLife app installed. Flymo EasiLife is a free
app for your mobile device. The short-range interaction
with the product is called Bluetooth
between the product and app has been confirmed, you
have access to the menus and functions as long as you
are within short-range (Bluetooth
3.10.13.1 To pair the app and the product
1.
2.
3.
Settings > Installation
ECO mode .
4.
3.10.14 General
In
product.
3.10.14.1 To set the time & date
1.
Avoid house
2.
3.
Settings > Installation
4.
5.
6.
3.10.14.2 To set the language
1.
2.
3.
3.10.14.3 To set the country
1.
Use the arrow buttons and the OK button to move
through the menu structure
> FrostSense .
Push the OK button to select
Push the BACK button.
®
Download the app on your mobile device.
To get access to the menu on
Do steps 1–3 in
page 21 .
Use the arrow buttons and the OK button to move
through the menu structure
> Bluetooth > New pairing .
Follow the instructions in the app.
General you can change the general settings of the
To get access to the menu on
Do steps 1–3 in
page 21 .
Use the arrow buttons and the OK button to move
through the menu structure
Time & Date .
Use the arrow buttons to set the time and then
push the BACK button.
Use the arrow buttons to set the date and then
push the BACK button.
Use the arrow buttons to set the time format and
then push the BACK button.
Use the arrow buttons to set the date format and
then push the BACK button.
Do steps 1–3 in To get access to the menu on
page 21 .
Use the arrow buttons and the OK button to move
through the menu structure
Language.
Use the arrow buttons to select language and then
push the BACK button.
To get access to the menu on
Do steps 1–3 in
page 21 .
Settings > Installation
FrostSense .
®
. When pairing
® ).
Settings > Installation
Settings > General >
Settings > General >
1392 - 007 -