Sfp Transceivers; Internet Connection - Fortinet FortiSwitch M426E-FPOE Quick Start Manual

SFP Transceivers

Transmit Optical Bore
Caution: SFP
transceivers are
static sensitive
devices. Use
an ESD wrist
strap or similar
grounding device
when handling
transceivers.
Extraction Lever
Do not install
To install the SFP transceivers
or remove SFP
transceivers while
1. Ensure that you are properly grounded.
fiber-optic cables
2. Remove the
are still attached.
front panel of the unit.
This can cause
3. Position the
damage to the
opening
cables, cable
oriented. When the
connectors,
extraction lever
and the optical
Note:
interfaces. It may
the SFP transceiver module is correctly oriented each
also prevent the
time that you are inserting a transceiver.
transceiver from
4. Hold the sides of the
latching correctly
cage socket
into the socket
connector.
Note: Installing
and removing
SFP transceivers
can shorten their
useful life. Do not
install or remove
transceivers more
than is necessary.
5. Press the
your thumb.
10
SFP Cage Sockets
Receive Optical Bore
Socket Latch
caps from the SFP cage sockets
SFP transceiver in front of the cage socket
and ensure that the transceiver is correctly
transceiver is correctly oriented, the
will be level with the socket latch.
SFP cage socket orientation may vary. Ensure that
SFP transceiver and slide it into the
until it clicks into place.
transceiver firmly into the cage socket
Power Connection
on the
Connect your device to a
modem, but could also be another device on your network.
Note:
connected to a different power source. In this way, if one power source fails, the
other may still be operational and the unit will not lose power.
with

Internet Connection

Ethernet Port
power outlet and an Internet connection.
If the unit has a redundant power supply, each power cable should be
Internet
This is usually a
11