Sms Settings; Send Parameter Settings - Teltonika FM2100 User Manual

5.7

SMS settings

• SMS data send – enable or disable periodic data and event SMS use. Note, that this
does not affect replies to messages – they are always sent to sender number.
• SMS send timeout – SMS send timeout (recommended 60 sec.)
• SMS Login – module login for SMS
• SMS Password – module password for SMS
• Server phone number – authorized server phone number for SMS requests,
configuration, 24-coordinates and event binary SMS
• Authorized phone numbers – other authorized numbers that are allowed to control
FM2 remotely
Module login and password, server and authorised number list is used to
protect FM2 module from unauthorised access. Module accepts messages
only from a list of authorised numbers and with proper module login and
password. Numbers must be without "+" or "00" prefix. If no authorised
numbers are entered, module accepts messages from all numbers. Server
phone number automatically counts as authorised number.
5.8

Send Parameter settings

Send parameters window allow to set GPRS and SMS data send periods, sending
schedules, set allowed operator list.
• Send period – GPRS data sending to server period. Module makes attempts to send
collected data to server every defined period. If it does not have enough records
(depend on parameter Min. Saved Records described above), it tries again after
defined time interval
• Time step - FM2 is improved with 24-coordinates-in-one-SMS sending mechanism.
24-coordinates-in-one-SMS mechanism is used in areas where no GPRS coverage is
available. Module collects data and sends to server binary SMS containing
information about last 24 collected points with interval between them defined in
20