Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Teltonika FM2200
Summary of Contents for Teltonika FM2200
- Page 1 FM2200 User Manual V1.3...
-
Page 2: Table Of Contents
..........................23 ARAMETER SETTINGS ................................24 SETTINGS 5.9.1 Monitoring ..............................25 5.9.2 Event Generating ............................26 5.9.3 Hysteresis ................................26 SMS COMMAND LIST ....................... 27 FM2200 ..........................27 SETTINGS FOR .............................27 COMMAND LIST getstatus ...................................28 getweektime ..................................29 getops ....................................29 getcfgtime ..................................29 getgps ....................................29 getver....................................29 getinfo ....................................30 getio ....................................30... - Page 3 Record search (ID=105) ..............................33 Link timeout (ID=107) ..............................33 ...................33 ATA ACQUISITION AND SENDING PARAMETERS Time based acquire interval (ID=11) ..........................33 Distance based acquire interval (ID=12) ........................33 Angle based coordinate acquisition (ID=13) ........................33 Data Send interval (ID=270) ............................34 Minimum records number in packet (ID=232) .......................34 GPRS Enable (ID=240) ..............................34 GSM Operator list (ID=271) ............................34 GPRS Data send week time schedule (ID=272) ......................35...
-
Page 4: Introduction
10 V...30 V DC, power – not more than 12 W. To avoid mechanical damage, it is advised to transport the FM2200 device in an impact-proof package. Before usage, the device should be placed so that its LED indicators are visible, which show... -
Page 5: Legal Notice
SMS – Short Message Service. AC/DC – Alternating Current/Direct Current. Record – AVL data stored in FM2200 memory. AVL data contains GPS and I/O information AVL packet - Data packet that is being sent to server during data transmission. AVL packet... -
Page 6: Basic Description
BASIC DESCRIPTION FM2200 is a terminal with GPS and GSM connectivity, which is able to determine the object‟s coordinates and transfer them via the GSM network. This device is perfectly suitable for applications, which need location acquirement of remote objects. It is important to mention that FM2200 has additional inputs and outputs, which let you control and monitor other devices on remote objects. -
Page 7: Mechanical Features
Sleep: 25 mA r.m.s. Tyco Micro MATE-N-LOK Socket 16 Operation temperature: 3 mm 1445022-6 -25C ... +55C Storage temperature: Mini USB socket -40C ... +70C Storage relative humidity 5 ... 95 % (non condensation) Figure 1. FM2200 view & specifications... - Page 8 Figure 2. FM2200 view & dimensions...
-
Page 9: Sim Card Insert Scheme
Assemble device with enclosure‟s top part as shown and screw the bolts. Installing FM2200 drivers In order to configure FM2200, “MS Windows XP Service Pack 2” or later version of MS Windows must be installed. “MS Windows XP SP2”... - Page 10 2) Hotfix KB935892 (usbccgp.sys 5.1.2600.3116). After installing the HotFixes, reboot your PC. Power up the FM2200 and connect it to the computer. “Found New Hardware Wizard” for “FM22XX Port” will appear. Choose “Install from a list or specific location” (Figure 3) and press “Next”.
-
Page 11: Navigate Led
GPS is turned OFF (SLEEP mode) Modem LED When power is connected to FM2200, modem led is switched on permanently. Status LED When device has uploaded firmware – Status LED should blink. If LED does not blink – it means... -
Page 12: Socket 16
FM2200 has USB interface; it has Mini USB connector type. FM2200 creates two COM-Ports: “FM22XX Port”, which can be used as system port (to flash firmware and configure the device) and “FM22XX GPS” as GPS NMEA 0183 output at 9600 baud... -
Page 13: 2.11 Accessories
Figure 9. COM-Ports 2.11 Accessories Note: Teltonika does not provide any additional equipment like panic buttons, door sensors or others. Alarm buttons, door sensors, etc. Alarm buttons, door sensors, ignition, etc. return two states: high or low voltage. Digital inputs are used to read this information. - Page 14 Figure 11. Inverting relay connection Immobilizer relay When connected as shown below, FM2200 disables engine starter when output is ON. More details about relays can be found below. Figure 12. Immobilizer relay connection Relays A simple automotive relay is used to invert input signal or to immobilize engine starter. Note, that they are available as 12 V or 24 V.
-
Page 15: Firmware
RILS stands for Remote Imlet Loading System, which is used to update FM2200 ARM processor firmware. In order to update firmware, server sends a SMS to the FM2200 and directs it to connect to the server and download new firmware. The special web interface is used for this operation. - Page 16 After logging in click on „Upload FM4‟, click Browse near „Upload new firmware:‟, select FM2200 firmware file from hard disk, click OK and then Upload. Select uploaded firmware from the list (last one) and click next. Enter necessary parameters in the fields: ...
-
Page 17: Operational Basics
OPERATIONAL BASICS Operational principals FM2200 module is designed to acquire records and send them to the server. Records contain GPS and I/O information. Module uses GPS receiver to acquire GPS data and is powered with three data acquire methods: time-based, distance-based and angle-based method. Method‟s details are described in GPS section. -
Page 18: Sleep Mode
It keeps adding these intervals until it is time to make a record, then FM2200 records its location and adds odometer value, which is equal to the sum of all distances, measured every second. When record is made, odometer resets to zero and distance calculation starts all over again. -
Page 19: Configuration
FM2200 Configurator program and selecting COM port. FM2200 has one user editable profile stored in Flash no. 1 memory and one extra profile stored in Flash no. 0, which cannot be edited by the user. Profile from Flash no. 0 is used by system and cannot be selected as active, while profile from Flash no. -
Page 20: System Settings
Angle based acquire value. If so, saves the record to memory. This check is being performed every second. FM2200 is able to collect records using three methods at the same time: time, distance and angle based data acquisition:... -
Page 21: Geofence Settings
Entering zero disables data acquisition depending on angle. Geofence settings FM2200 has 5 configurable Geofence zones and it can generate event when defined Geofence zone border is crossed. Frame border – frame border is an additional border around Geofence zone. It is additional area around defined zone used to prevent false event recording when object stops on the border of the area and because of GPS errors some records are made inside area and some –... -
Page 22: Gsm Settings
Records‟ defines minimum number of coordinates and I/O data that should be transferred with one connection to server. If FM2200 does not have enough coordinates to send to server, it will check again after time interval defined in „Sending Period‟ (see below). -
Page 23: Gprs Settings
SMS Password – module password for SMS Server phone number – authorized server phone number for SMS requests, configuration, 24- coordinates and event binary SMS Authorized phone numbers – other authorized numbers that are allowed to control FM2200 remotely... -
Page 24: Send Parameter Settings
At scheduled time match FM2200 checks for GPRS session activity. If GPRS session is alive, FM2200 sends data to server according to Send period parameter. If it is not, FM2200 checks if it is able to re-establish the session. -
Page 25: I/Osettings
Operators list – FM2200 is able to use GPRS with all operators, but if at least one operator is entered in the list, FM2200 is allowed to connect to GPRS only while operating in listed operator‟s network. Figure 22. Send Parameters configuration I/O settings When no I/O element is enabled, AVL packet comes with GPS information only. -
Page 26: Monitoring
SMS mode if SMS is enabled in SMS settings. High and Low levels – define I/O value range. If I/O value enters or exits this range, FM2200 generates event. “Generate event” parameter defines when to generate event – when value enters defined range, exits it or both. -
Page 27: Event Generating
5.9.2 Event Generating Events happen when the value of enabled I/O intersects thresholds (enter, exit or on both) predefined by High and Low level thresholds. Table below defines all available values of I/O settings. Priority low, high High level maximum threshold Low level minimum threshold Generate event... -
Page 28: Sms Command List
Essential fields in „SMS Settings‟ are „Login‟ and „Password‟. This login and password should be used with every SMS sent to FM2200 as identifiers and means of protection from SMS from unauthorised numbers. Command structure: <login><space><password><space><command>... -
Page 29: Getstatus
getio Readout digital inputs and outputs readio # Readout input value according entered ID, # - ID value setdigout ## set digital outputs 0 – OFF, 1 – ON DOUT1 DOUT2 getparam # Readout parameter value according entered # - ID value. setparam # # Set parameter value according entered ID and Value. -
Page 30: Getweektime
getweektime Response details Description Clock Sync Indicates system clock synchronization status. 0 – System is not synchronized, 1 – System synchronized Day Of Week – indicates current day of week starting from 0 – Monday, 1 – Tuesday, etc. Time Indicates current GMT time WeekTime Indicates time in minutes starting from Monday 00:00 GMT... -
Page 31: Getinfo
getinfo Response details Description Device Initialization Time RTC Time Restart Counter Error Counter Number of Sent Records Number of broken records Profile CRC Fail counter Failed GPRS counter Failed link counter UPD Timeout counter Sent SMS Counter NOGPS No GPS Timer GPS receiver state. -
Page 32: Setparam
setparam #### # Sets new value for parameter. ID consists of 4 digits – first digit identifies profile, second, third and fourth identifies parameter ID as described in Parameter List chapter. In value field a new parameter value is entered. Example: ‘setparam 1245 127.0.0.1’... -
Page 33: Debug Mode
Debug mode FM2200 is able to transmit its current state when connected to PC using USB cable. It is used to detect errors and provide information to possible solutions when operating as unexpected. Download Terminal from: http://avl1.teltonika.lt/Downloads/Software/Terminal.rar. After launching terminal choose baud rate 115200 and hardware control – none. Select COM port which is assigned to “FM22XX Port”. -
Page 34: Parameter List
Parameter List FM2200 uses only one profile, therefore all changes to parameters must be done in profile1 (profile0 is for global parameters). Global Parameters Record search (ID=105) Record search parameter is responsible for record searching order. Value of 0 arranging data starting from newest, while value of 1 arranging data starting from oldest. -
Page 35: Data Send Interval (Id=270)
Minimum Maximum Recommended Goes with (depends on) parameters Value type value value value Time based acquire interval (ID=11) Distance based acquire interval (ID=12) Data Send interval (ID=270) Time interval in seconds, indicating frequency of sending data to server. 0 – disabled. Minimum Maximum Recommended... -
Page 36: Gprs Data Send Week Time Schedule (Id=272)
GPRS Data send week time schedule (ID=272) This parameter manages when it is allowed to open GPRS context. When module starts it is prohibited to open the context. When modem‟s GPRS context is being closed (for example changing network) it is allowed to open it only at defined time. It is possible to allow connections every 10 minutes up to once per day. -
Page 37: Security Settings And Parameters
Minimum Maximum Recommended Goes with (depends on) parameters Value type value value value SMS Data send allow (ID=250)Format is described in the 4294967295 3600000 next chapter. SMS Data send week time schedule (ID=273) Security settings and parameters SMS User login (ID=252) User login is used to ensure module security. -
Page 38: Gprs Access And Address Settings
GPRS access and address settings APN Name (ID=242) Parameter defines GPRS Access Point Name. Minimum Maximum Recommended Goes with (depends on) parameters Value type value value value GPRS Enable (ID=240) 32 char Empty APN username (ID=243) S8[32] string APN Password (ID=244) APN username (ID=243) Parameter defines APN username. -
Page 39: Geofence Zones Settings And Parameters
Geofence zones settings and parameters This chapter explains how to get all parameters for the first GeoFence zone (all ID numbers are for the 1 zone). And at the end of the chapter (part 1.6.7) is presented a table with the IDs of all the rest GeoFence zones. -
Page 40: All The Rest Zones
Minimum Maximum Recommende Goes with (depends on) parameters Value type value value d value GeoFence border width (ID=20) -90.0 90.0 GeoFence Zone #1 Configuration Float Parameter (ID=30) GeoFence x2 (ID=33) Parameter has two meanings dependent on zone shape. If shape is rectangular, then ID=33 is right upper corner X coordinate in WGS. -
Page 41: Io Properties
Minimum Maximum Recommended Goes with (depends on) parameters Value type value value value Time based acquire interval (ID=11) Distance based acquire interval (ID=12) Angle based coordinate acquisition (ID=13) IO properties IO properties – are additional data sources which are recorded along with usual GPS data. IO#1 property parameter (ID=300) Parameter defines IO property value. - Page 42 Minimum Maximum Recommended Goes with (depends on) parameters Value type value value value IO#1 property parameter (ID=300) IO#1 priority (ID=301) -2147483648 2147483648 IO#1 High level (ID=302) IO#1 logic operand (ID=304) IO#1 averaging length (ID=305) IO#1 logic operand (ID=304) Parameter defines when event is sent: 0: on range exit, 1: on range entrance, 2: both, 3: monitoring.
-
Page 43: Mounting Recommendations
When placing antennas avoid easily reached places. Avoid GPS antenna placement under metal surfaces. Avoid placing FM2200 device near car radio, speakers or alarm systems. GPS antenna must be placed so its state is as horizontal as possible (if antenna is leant more than 30 degrees, it is considered incorrect mounting). -
Page 44: Module Installation
It is recommended to place GPS antenna behind dashboard as close to the window as possible. A good example of GPS antenna placement is displayed in a picture below (area colored green). Figure 28. Correct placement of FM2200 Module Installation Module should not be seen or easily reached. -
Page 45: 10 Change Log
Pinout description fixed. 090727 Navigation LED description corrected. 090827 0.10 Min. distance data calculation algorithm description corrected. Formatting revision. 091105 Major revision of engineering version 0.10. Initial release 091116 FM2200 view & dimensions figure added. 100211 New Skytraq GPS module details added.
Need help?
Do you have a question about the FM2200 and is the answer not in the manual?
Questions and answers