uSing tHE contRoL PAnEL
Freezer Temp ( 1 ) indicates the current freezer temperature.
Fridge Temp ( 2 ) indicates the current refrigerator temperature.
If you do not press any button, the freezer and fridge temperature indicator turn off in a few seconds.
If you press any button, the display lights up again.
Water filter usage
( 10 ) Filter
1. Normally the filter indicator is blue, yellow, or green when you purchase or install your refrigerator,
depending on your model.
2. After you use about 270 gallons of water, the filter indicator turns Light Pink. (about 5 months)
3. After you use about 300 gallons of water, the filter indicator turns Red. (about 6 months)
4. Remove the old water filter and install a new one when the filter indicator is red. Reset the filter indicator
(Blue)
(Red)
(Reset the indicator)
by pressing Alam/Hold 3 sec for Filter Reset button for 3sec. The filter indicator turns blue, yellow, or
green when you reset the indicator.
• If water is not dispensing or dispensing slowly, you need to replace the water filter
because the water filter is clogged.
• Some areas have large amounts of lime in their water, which causes the water filter to
clog more quickly.
cHAnging tHE wAtER FiLtER
To reduce risk of water damage to your property DO NOT use generic brands of water filters in your
SAMSUNG Refrigerator. uSE OnLy SAMSung brAnD WATEr FILTEr. SAMSUNG will not be
wARning
legally responsible for any damage, including, but not limited to property damage caused by water
leakage from use of a generic water filter. SAMSUNG Refrigerators are designed to work ONLY WITH
SAMSUNG Water Filter.
The Filter light turns red to let you know when it is time to change your water filter cartridge.
To give you time to get a new filter, the red light comes on just before the capacity of the current
filter runs out.
Changing the filter on time provides you with the freshest, cleanest water from your refrigerator.
1. Shut off the water supply. Then, turn the water filter ( 1 ) about 1/4 turn, counter-clockwise.
2. Pull the water filter ( 1 ) from the case filter ( 2 ).
• To change the water filter more easily, shut off the water supply valve.
• Sometimes, it is hard to disassemble the water filter because impurities in the water cause it to stick.
If you are having difficulties, grip the water filter firmly and pull it hard.
1
10
2
(Red)
2
1
Operating _25
Need help?
Do you have a question about the RF4287HARS and is the answer not in the manual?
Questions and answers
How many cubic feet does this refrigerator have?
The total capacity of the Samsung RF4287HARS refrigerator is 28 cubic feet.
This answer is automatically generated
How do I reset my display after a power outage? Blinks 5 , 25, 39
To reset the display on a Samsung RF4287HARS refrigerator after a power outage with blinking codes, press and hold the Lighting and Energy Saver buttons (located at the top left and top right corners of the display) for about 5 seconds. If the issue persists, try unplugging the refrigerator, waiting 10 minutes, and plugging it back in. If the blinking continues for a long time, contact Samsung support.
This answer is automatically generated
How to turn on ice it is locked on child safe
To unlock the child safety feature on the Samsung RF4287HARS, press the Child Lock button again. If the control panel is unresponsive, check if Child Lock is activated and disable it by pressing the button. Once unlocked, you can turn on the ice maker by pressing and holding the Crushed and Cubed buttons together for 5 seconds.
This answer is automatically generated
What year is model rf4287
How do I get 0F OF off of the display
How do I get rid of of of
After changing the water filter my touchscreen controls no longer work. 4 lights are on on the bottom row but none of them work, and no other lights/ controls are operational.
how many cu,ft
The Samsung RF4287HARS refrigerator has a total capacity of 28 cubic feet.
This answer is automatically generated
The lever on the outside of the door will not change from water to ice
To fix the lever on the Samsung RF4287HARS refrigerator door that will not change from water to ice, replace the switching mechanism inside the dispenser. This part may cost around $65 and can be installed yourself. Once replaced, the dispenser should properly switch between water and ice.
This answer is automatically generated
took water filter holder tray out how to snap it back in