Setting up your French Door Refrigerator
inStALLing tHE wAtER LinE
Connecting the water supply line to the refrigerator.
There are several items that you need to purchase to complete this connection.
You may find these items sold as a kit at your local hardware store.
use copper tubing
• ¼" copper tubing
• ¼" compression nut (2pc)
• Ferrule (2pc)
1. Slip the compression nut ( A ) through the supplied plastic tubing ( A ).
2. Tighten the compression nut ( A ) onto the 1/4" compression fitting.
- If you are using copper tubing, slip the compression nut ( b ) (not supplied) and ferrule (not supplied)
on copper tubing (not supplied) as shown.
- If you are using plastic tubing ( b ) , insert the molded end (Bulb) of the plastic tubing ( b ) into the
compression fitting.
Do not use without the molded end(Bulb) of the plastic tubing ( b ).
cAution
3. Tighten the compression nut ( b ) onto the compression fitting.
Do not over-tighten the compression nut ( b ) .
4. Turn water on and check for any leakage. If you find water drops or leakage in the connection areas, turn
off the main water supply. Check the connections and, if nescessary, tighten.
5. Flush 1 gallon of water through the filter before drinking or using the water from the refrigerator. (Flush
approximately 6 minutes.) To flush, press a large glass or cup against the water dispenser lever. Fill the
glass, empty it into the kitchen sink after it is filled, and then repeat.
6. After you turn on the refrigerator, let the ice maker make ice for 1 to 2 days. Over that period of time,
throw out the first 1 or 2 buckets of ice the freezer makes to ensure all impurities have been removed
from the water line.
Only connect the water line to a drinkable water source.
If you have to repair or disassemble the water line, cut off 1/4" of the plastic tubing to make sure you
get a snug, leak-free connection.
use Plastic tubing
• ¼" plastic tubing
→ Molded end(Bulb)
• ¼" compression nut (2pc)
Refrigerator
Plastic tubing
(A) (Supplied)
Ferrule (not
supplied)
copper tubing
Plastic tubing (B)
or
(not supplied)
(not supplied)
Household water supply line
compression
nut (A) (1/4")
(Supplied)
compression
fitting (Supplied)
Molded
end(Bulb)
compression nut
(B) (1/4") (not
supplied)
setting up _21
Need help?
Do you have a question about the RF4287HARS and is the answer not in the manual?
Questions and answers
How many cubic feet does this refrigerator have?
The total capacity of the Samsung RF4287HARS refrigerator is 28 cubic feet.
This answer is automatically generated
How do I reset my display after a power outage? Blinks 5 , 25, 39
To reset the display on a Samsung RF4287HARS refrigerator after a power outage with blinking codes, press and hold the Lighting and Energy Saver buttons (located at the top left and top right corners of the display) for about 5 seconds. If the issue persists, try unplugging the refrigerator, waiting 10 minutes, and plugging it back in. If the blinking continues for a long time, contact Samsung support.
This answer is automatically generated
How to turn on ice it is locked on child safe
To unlock the child safety feature on the Samsung RF4287HARS, press the Child Lock button again. If the control panel is unresponsive, check if Child Lock is activated and disable it by pressing the button. Once unlocked, you can turn on the ice maker by pressing and holding the Crushed and Cubed buttons together for 5 seconds.
This answer is automatically generated
What year is model rf4287
How do I get 0F OF off of the display
How do I get rid of of of
After changing the water filter my touchscreen controls no longer work. 4 lights are on on the bottom row but none of them work, and no other lights/ controls are operational.
how many cu,ft
The Samsung RF4287HARS refrigerator has a total capacity of 28 cubic feet.
This answer is automatically generated
The lever on the outside of the door will not change from water to ice
To fix the lever on the Samsung RF4287HARS refrigerator door that will not change from water to ice, replace the switching mechanism inside the dispenser. This part may cost around $65 and can be installed yourself. Once replaced, the dispenser should properly switch between water and ice.
This answer is automatically generated
took water filter holder tray out how to snap it back in