Husqvarna DC 6000 Operator's Manual page 96

2. Put a cap in the hose.
3. Remove the locking pin and the pin.
4. Push down the frame and install the pin when the
frame is in the transport position.
5. Install the locking pin.
Storage of the product
• The product must be stored inside away from
outdoor elements.
• Do not expose the product to rain or moisture.
• Attach the locking casters safely.
96
• Disconnect the product from the power source.
• Store the product and the equipment in a dry area
with no frost or excessive heat.
• Store all equipment in an locked area, so that it is
out of reach of children and unauthorized persons.
Disposal of the product
• Obey the local recycling requirements and applicable
regulations.
• When the product no longer is used, send it to
a Husqvarna dealer or discard it at a recycling
location.
1883 - 001 - 01.06.2022