1. Turn the ON/OFF switch to the OFF position.
2. Wait for 30 seconds.
3. Open the valve on the compressed air dryer.
4. Remove the cover from the compressed air dryer.
88
5. Remove the filter from the compressed air dryer.
6. Clean the filter for the compressed air dryer. Replace
the filter for the compressed air dryer if it is
necessary.
To clean the cyclone and container
WARNING:
equipment, refer to
equipment on page 80 , during filter change.
Dust can come out during filter change.
1. Turn the ON/OFF switch to the OFF position.
2. Wait for 30 seconds.
3. Lower the product to transport position and install
the frame pin.
Use personal safety
Personal protective
1883 - 001 - 01.06.2022