Installing On A Din Rail / Removing - Siemens SIMATIC NET SCALANCE W774-1 Operating Instructions Manual

5.5

Installing on a DIN rail / removing

Procedure for installation
Follow the steps below to fit the SCALANCE W774/W734 to a DIN rail:
1. Place the device on the upper edge of the DIN rail as shown in the figure.
2. Press the device against the DIN rail until the DIN rail slider catch locks in place.
3. Mount the connecting cables and the antenna, see section "Connecting up (Page 45)".
SCALANCE W774-1 / W734-1
Operating Instructions, 03/2022, C79000-G8976-C325-15
Installation and removal
5.5 Installing on a DIN rail / removing
43