Roche 91 Series Service Manual page 184

– Valve drivers, A-58
– System interconnect, A-56
– Block diagram
– 9110 analyzer, A-39
– 9120, 9130, 9140, 9180 analyzer, A-40
– 9181 analyzer, A-41
– System interconnect - 9110, 9120, 9130, 9140, A-42
Electronics, A-33
– Display board, A-35
– ISE SBC card, A-33
– Lamp board, A-34
Error messages, D-5
– ↑ ↓, D-11
– ↑↑↑↑ ↓↓↓↓, D-11
– CHECK ELECTRODES, D-9
– CHECK REFERENCE HOUSING, D-7
– CHECK SAMPLE CONTACTS(9110), D-6
– CHECK TEMPERATURE (9140/9180/9181 only),
D-12
– CLEANING FLUID NOT DETECTED, D-8
– CLOG IN SAMPLE PATH (9110 only), D-11
– CONDITIONING FLUID NOT DETECTED (except
9110), D-8
– ERR, D-12
– ERROR
– LOWER NEEDLE SENSOR, D-13
– UPPER NEEDLE SENSOR, D-13
– INTERFACE ERROR, D-9
– NO SAMPLE, D-8
– NOT CAL'D, D-9
– PAPER JAM OR PRINTER DEFECT, D-9
– PERFORM DAILY MAINTENANCE (except 9110),
D-12
– PLEASE CLOSE SAMPLE DOOR (except 9181), D-7
– REPLACE FLUID PACK, D-12
– SAMPLER JAMMED OR DEFECTIVE, D-14
– STANDARD A NOT DETECTED, D-5
– STANDARD B NOT DETECTED STANDARD C NOT
DETECTED (9180/9181 only), D-6
– STATUS
– NOT CALIBRATED, D-5
– VALVE OVERTEMP! CHECK VALVES, D-13
– WHEEL MISSING OR SAMPLER DEFECT, D-13
ESD protection, A-8
– Conclusion, A-9
– Explanation of the phenomenon, A-8
– How can ESD protection be guaranteed?, A-9
– Influence of electrostatic charges on components, A-8
– Why is ESD protection so important today?, A-9
F
Fluidic Module, A-27
– Cleaning solution (9110 only), A-28
Roche Diagnostics
F-4
91xx pH/Electrolyte Analyzers
– Main tube set (all models)/ Intake tube set (9110 only),
A-28
– Reference solution, A-28
– Sample Contacts (9110 only), A-29
– Standard A, A-27
– Standard B, A-27
– Standard C (not on 9110), A-27
– Waste liquids, A-28
Front door assembly, A-23
H
How to Use This Manual, 9
I
Important information, A-5
Important notes and warnings, A-6
Intended use, 3
Interface information, A-19
Interface specifications
– Data Link Information (9180/9181 only), A-20
– Example data string information, A-20
– Interface information, A-19
ISE SBC card, A-33
L
Lamp board, A-27, A-34
M
Main tube set (all models)/ Intake tube set (9110 only),
A-28
Maintenance, C-9
– Annual preventive, C-9
– Daily, C-9
– Monthly, C-9
– Six month, C-9
– Weekly, C-9
Mechanical assemblies
– Display board, A-27
– Electrode holder, A-24
– Front door, A-23
– Lamp board, A-27
– Needle unit, A-23
– Peristaltic pump, A-24
– Printer, A-25
– Rear panel, A-25
– SBC board, A-26
– Solenoid, A-24
April 2007
Service manual · Version 2.0