Using The Inverter - Toro 51860T Operator's Manual

Using the Inverter

Important:
Use the inverter only in temperatures
that are within the appropriate range; refer to
Specifications (page
Important:
Ensure that the combined load
requirement of your equipment does not exceed
the inverter's output rating.
Important:
Do not connect the inverter to a
household wall outlet or any AC distribution
wiring, and do not connect the neutral inverter
connector to ground.
1. Install the battery; refer to
(page 6)
2. Press the power button on the back of the
inverter to turn the inverter on, the LED lights up
to solid green (Figure
3. Connect your device to a USB port or the AC
receptacle (Figure
6).
Installing the Battery
3).
5).
Figure 5
4. The power button has an LED that signals the
condition of the inverter; refer to the following
table to interpret the LED indicator light on the
inverter.
Indicator light
Off
Solid Green
Flashing Green
Solid Red
Flashing Red,
intervals of 4
Flashing Red,
intervals of 5
Flashing Red,
intervals of 6
*Refer to
information.
Important:
use, turn the inverter off and remove the
battery from the inverter.
g333936
7
Condition
No battery pack inserted
Normal operation
Low battery voltage
High-voltage protection or battery error
Short-circuit protection or overload
protection
Low-voltage protection
Battery pack and/or battery inverter is over
or under the appropriate temperature range.
Troubleshooting (page 9)
Whenever the inverter is not in
for more