Accessories And Attachments - Bosch GWS12V-30 Operating/Safety Instructions Manual

Service
Preventive maintenance performed by un -
au thorized personnel may result in
misplacing of
components which could cause serious
hazard. We recom mend that all tool service
be performed by a Bosch Factory Service
Center or Authorized Bosch Service Station.
SERVICE MEN: Disconnect tool and/or
charger from power source before servicing.
Batteries
Be alert for battery packs that are nearing
their end of life. If you notice decreased
tool performance or significantly shorter
running time between charges then it is
time to replace the battery pack. Failure to
do so can cause the tool to operate
improperly or damage the charger.
Tool Lubrication
Your Bosch tool has been properly
lubricated and is ready for use.
Store accessories in a dry and temperate environment to avoid corrosion and
deterioration.
Maintenance
To avoid accidents, always disconnect the tool and/or charger from
the power supply before servicing or cleaning.
NO USER SERVICEABLE
PARTS INSIDE.
internal wires

Accessories and Attachments

The use of any other attachments or acces so ries not specified in
this manual may create a hazard.
Do not use Type 11 abrasive (cup) wheels with this tool. This tool is not
designed for use with type 11 (cup) abrasive grinding wheels.
D.C. Motors
The motor in your tool has been engineered
for many hours of dependable service. To
maintain peak efficiency of the motor, we
recommend it be examined every six
and months. Only a genuine Bosch replacement
motor specially designed for your tool
should be used.
Cleaning
plastic parts. Some of these are: gasoline,
car bon tetrachloride, chlorinated cleaning
solvents,
detergents that contain ammonia.
Ventilation openings and switch levers must
be kept clean and free of foreign matter. Do
not attempt to clean by inserting pointed
objects through opening.
-18-
Certain cleaning agents
and solvents damage
ammonia and household