Intensity Settings - Philips Sonicare 7000 Manual

12
English

Intensity Settings

Your power flosser comes with 10 different intensity settings. To manually
change the intensity, turn on the base and turn the intensity dial to the
setting you prefer.
Note: For first time use, start the device from the lowest setting. It is
recommended to increase the intensity you use over the course of a
few weeks. This can give better cleaning benefits as you are able to
tolerate higher settings.
Features
Pacer
The clean and massage modes have a pacer. This feature indicates when
you are supposed to move to the next section of your mouth via a short
pause in the waterflow.
30
sec.
30
sec.
Note: This feature is on clean mode and massage modes only.
Activating or deactivating pacer
You can activate or deactivate the pacer feature by holding the on/off
button and the mode button simultaneously for 5 seconds.
- When deactivated, all the lights will flash once.