Disposal; Troubleshooting - Philips Avent SCF358 User Manual

Disposal

Your product is designed and manufactured with high quality materials and components,
which can be recycled and reused. For recycling information, please contact your local
waste management facilities or visit www.recycle.philips.com.

Troubleshooting

This chapter summarizes the most common problems you could encounter with the
appliance. If you are unable to resolve the problem with the information below, contact the
Consumer Care Center in your country.
Problem After switching on the bottle warmer, the entire progress indicator blinks fast
and switches off.
• The temperature of water in the bottle warmer is too hot or too cold.
Cause
• The boil-dry protection is activated.
• Switch off and and unplug. Let it cool down for a few minutes. Make sure
Solution
you fill it with fresh room temperature water.
• The bottle warmer automatically switches off if it is on and there is no
water or not enough water in it. Switch off and unplug. Let it cool down
first. Make sure you fill it with enough fresh room temperature water.
• Fill the bottle warmer with water to the level of the milk. If you have a large
volume of milk to warm, fill to approximately 1 cm below the top of the
bottle warmer. The bottle warmer is ready to use again.
Problem The milk is too hot.
• You may have selected an incorrect setting or are using a milk bag.
Cause
• You may have filled too much water in the bottle warmer.
• Select the milk volume setting based on the milk volume, not the bottle
Solution
size.
• If you are using a milk bag, select the keep warm / defrost setting.
• Fill the bottle warmer with water to the level of the milk. If you have a large
volume of milk to warm, fill to approximately 1 cm below the top of the
bottle warmer. The bottle warmer is ready to use again.
- 22 -