Input 3 Connections (Cbx500 Only); Outputs - Datalogic P-Series Product Reference Manual

INPUT 3 CONNECTIONS (CBX500 Only)

Figure 10 - Input 3 Using External Power
NOTE

OUTPUTS

NOTE
The outputs are programmed using VPM.
1. Start VPM
2. Select the General icon.
3. Select the Communication button.
4.
Outputs are typically used either to signal the data collection result or to control an
external lighting system.
CBX500/800
+V
O1+
O1-
O2+
O2-
Do not connect to I3A or I34B signals, they are reserved.
When Outputs 1 and 2 are connected through the CBX connection box, you
must set the Output Type configuration parameters to NPN.
Select NPN for the output type.
Power Source - Outputs
Output 1 + opto-isolated and polarity sensitive
Output 1 - opto-isolated and polarity sensitive
Output 2 + opto-isolated and polarity sensitive
Output 2 - opto-isolated and polarity sensitive
FUNCTION
PRODUCT REFERENCE GUIDE
OUTPUTS
23