Safety; Electromagnetic Compatibility; Ce Compliance - National Instruments TB-2725 Installation Manual

Safety

For UL and other safety certifications, refer to the product label or visit
Note
ni.com/certification
appropriate link in the Certification column.

Electromagnetic Compatibility

For EMC compliance, operate this device with shielded cabling.
Note

CE Compliance

Refer to the Declaration of Conformity (DoC) for this product for any additional
Note
regulatory compliance information. To obtain the DoC for this product, visit
ni.com/certification
appropriate link in the Certification column.
TB-2725 Terminal Block
The TB-2725 terminal block meets the requirements of the following
standards for safety and electrical equipment for measurement, control,
and laboratory use:
• IEC 61010-1, EN 61010-1
• UL 61010-1
• CAN/CSA C22.2 No. 61010-1
, search by model number or product line, and click the
Emissions................................................EN 55011 Class A at 10 m
Immunity ................................................EN 61326:1997 + A2:2001,
EMC/EMI ...............................................CE, C-Tick, and FCC Part 15
The TB-2725 meets the essential requirements of applicable European
Directives, as amended for CE marking, as follows:
Low-Voltage Directive (safety)..............73/23/EEC
Electromagnetic Compatibility
Directive (EMC) .....................................89/336/EEC
, search by model number or product line, and click the
FCC Part 15A above 1 GHz
Table 1
(Class A) Compliant
6 ni.com