Philips GC628 User Manual page 23

Problem Possible cause
Board is The poles are not
shaky during installed properly
use. or the board is not
secured onto the
poles.
The board lock is
not fully inserted.
The board is not
fully secure in
vertical position.
Board cannot The board lock is
be tilted or be not locked onto the
used in pole.
horizontal
position.
The board tilting
lever has not been
released.
Solution
Refer to for correct
installation.
Insert the two board
locks fully until you
hear a "click" sound
( refer to
).
Make sure that the
board tilting lever is in
a locked position
before attaching it to
the poles ( refer to
Ensure that the board
lock is in a locked
position ( refer to
Ensure unlocking
tilting lever to allow
board to be tilted to its
desired position.
Once a desired
position is attained,
lock the tilting lever to
secure board..
( refer to / )
).
).
23