Mobilex DynaWalk User Manual page 3

Mobilex A/S
Grønlandsvej 5
DK-8660 Skanderborg
www.mobilex.dk
Angle ajust-
able handle
Frame lock
Height adjust-
ment knob
Frame cross
Castor wheel
with pedal brake
Assembly description & Function description
Initial check. Check with the list from above if nothing is missing. If
●
you'd discover at that stage that some part is missing or damaged, do
not continue assembly process. Contact your supplier of the product
right away.
Frame opening/closing and width adjustment. Press the front
●
parts of both crossbars downwards until the width adjustment knob will
reach the level of one of the width setting holes. Then turn the both
knobs clockwise to fix the desired frame width. The lower hole you'll
choose, the wider frame width will be set. To close the frame you have
to loosen two width adjustment knobs and pull the both crossbars up.
Attaching the side&arm supports and height adjustment. Slide
●
the side and arm supports pole in to the dedicated oval hole on the top
of main frame. Choose the desired height of the support and tie the
height adjustment knob, so the support is fixed and stable. Repeat
above steps to fix the support on the second side of the device. If you
want to change adjusted height of side supports, simply loosen the
knobs set the needed level and tie the knobs back.
WARNING! Both side&arm supports must be always adjusted to the
same height!
Locking the arm&side supports. Pull the locking pin out of it's spot.
●
Insert the tube end with smaller diameter, located on one of side&arm
supports in to the tube end with larger diameter on the other side&arm
support. Align the holes located on both tubes. Then reinsert the
locking pin in to it's place.
NOTE! To readjust the frame width or to fold the frame, you must unlock the frame lock in the
first place!
Rev. 10/13
Side&Arm
supports
Page 3 of 6
Elevable safety
back bars
Seat belt length
adjustment
Supportive
seat belt
Width adjust
ment knob
Width setting holes
UM-313001-GB