Advertisement
1. Frequency Chart
16 Modifiable FRS Two Way Channels (Channels 1-16) - Receive and Transmit.
2.Preparation before Programming
2.1. Computer System Requirements
Manufacture Programming Software Operating System: Windows 7, Windows 8
and Windows 10
CHIRP Programming Software Operating System: Windows 7\8\10,
Windows 2000, Mac OS, Linux
2
Advertisement
Need help?
Do you have a question about the BF-88A and is the answer not in the manual?
Questions and answers
Hello . I have problem with programing of BF-88E. When I program it (put same freq. and sameCTC/DCS DEC ) and on same chanel , when I speak on my UV-888S I can't hear on BF-88E and when I speak on BF-88E I can hear on my BF-888S. what is problem ?
The Baofeng BF-88E and Baofeng UV-888S may not be communicating despite using the same frequency and CTCSS/DCS settings due to differences in bandwidth settings. The BF-88E allows switching between wide and narrow bandwidth, while the UV-888S may have a fixed or different default bandwidth. If one radio is set to wideband and the other to narrowband, they may not receive each other’s transmissions properly. Adjust the bandwidth settings on both radios to match.
This answer is automatically generated
@Mr. Anderson . Thank you on your answer . Both radios are set to wide bandwidth . I have 2 pcs of BF-88E and after programing frequency they won't communicate between this 2 radios (same chanel and same freqency) also .