Related Manuals for Baofeng UV-32 Series
Summary of Contents for Baofeng UV-32 Series
- Page 2 PREFACE Thank you for purchasing UV-32 Series Amateur Radio, which is a Dual band/Dual display/Dual watch. This easy-to-use radio will deliver you secure, instant and reliable communications at peak efficiency. Please read this manual carefully before use. The information presented herein will help you to derive maximum performance from your radio.
- Page 3 Table of Contents ·········································1 ·········································1 ·········································10 ·········································10 1. GETTING STARTED Channel (MR) mode and Channel selection ······················1 ······················1 ·········································11 ·········································11 1.1 Regulations and Safety Warnings Select a Bank ·······························3 ·······························3 ·········································11 ·········································11 Content of the packaging Making a call ··································3 ··································3 ·········································11 ·········································11...
- Page 4 1. GETTING STARTED 1.1 Regulations and Safety Warnings EU Regulatory Conformance As certified by the qualified laboratory, the product is in compliance with the essential requirements and other relevant provisions of the Directive 2014/53/EU. All applicable EU regulations are regarded (2006/66/EC, 2011/65/EU, (EU)2015/863, 2012/19/EU). NOTE: It can be operating under 2000m.
- Page 5 Operating Prohibitions To protect you against any property loss, bodily injury or even death, be sure to observe the following safety instructions: 1. Do not operate the product in a location containing fuels, chemicals, explosive atmospheres and other flammable or explosive materials. In such location, only an approved Ex-protection model is allowed for use, but any attempt to assemble or disassemble it is strictly prohibited.
- Page 6 3. To charge a battery attached to the product, turn it off to ensure a full charge. 4. Do not remove the battery or unplug the power cord during charging to ensure a smooth charging process. 5. Do not dispose of the battery in fire. 6.
- Page 7 2.3 Use Caution with the Li-ion Battery (1) Do not short the battery terminals or throw the battery into a fire. Never attempt to remove the casing from the battery pack, as Baofeng cannot be held responsible for any accident caused by modifying the battery.
- Page 8 Red LED Green LED Status Flashing Steady Standby (charger empty) Error (charger with radio) Steady Charging Steady Charge complete. 2.5 Battery Maintenance The battery for your radio comes uncharged from the factory; please let it charge for at least four to five hours before you start using your radio. •...
- Page 9 3. PREPARATION 3.1 Installing / Removing the Battery Installing the Battery Pack (1) Position the battery pack over the back of the radio. (2) Engage the battery pack into the radio until battery pack is fully seated into the radio housing. (3) Tighten the screws using a coin or at object to secure the battery pack to the radio.
- Page 10 4. RADIO OVERVIEW 1. Antenna 8. Side Key (SK2)-Sweep/Monitor 2. Encoder/channel selector switch 9. Numeric keypad 3. TX_RX status indication 10.Built-in Microphone 4. Power/Volume knob 11.Charge contact 5. 2” color LCD screen 12.Speaker 6. PTT key 13.Accessory port 7. Side key (SK1) - short press to customize function, 14.Type-C charging port long press to emergency alarm "SK1"...
- Page 11 • FM RADIO: Quickly turn on or off the FM radio function. • SEARCH: Quickly turn on or off the one-touch frequency search function. • SCAN: Quickly turn on or off the scan function. You can also turn on or off the scan function by hold down the # key. •...
- Page 12 Enables access of repeaters in VFO/Frequency Mode. TX will be shifted lower in frequency than RX Reverse function enabled Talkaround has been activated, off grid at the central turntable. The transmission frequency is equal to the receive frequency The confidential calling feature is activated Narrowband enabled 4.3 Main keypad controls •...
- Page 13 5.1 Power on the radio • Turning the unit on To turn the unit on, simply rotate the Volume/Power knob clockwise until you hear a "click". If your radio powers on correctly there should be an audible double beep after about one second and the display will show a message or flash the LCD depending on settings for about one second. Then it will display a frequency or channel.
- Page 14 For everyday use, Channel (MR) mode is going to be a whole lot more practical than Frequency (VFO) mode. However, Frequency (VFO) mode is very handy for experimentation out in the field. Frequency (VFO) mode is also used for programming channels into memory. In Channel (MR) mode you can navigate up and down the channel by using the keys or the encoder.
- Page 15 (2) Select the desired radio frequency with the keys or input the frequency. Or • Press to automatically search a radio station. (3) Press [SK1] key to exit FM radio. Note: while you are listening to the radio, the frequency or channel of A / B receiving signal will automatically switch to the frequency or channel mode for normal transmitting and receiving.
- Page 16 displayed, and if there is no CTCSS or DCS, NONE is displayed (4) You can press the key to save the Search frequency and CTCSS or DCS to the channel. Note: During frequency Search, press the # key on the radio to switch between UHF or VHF bands. 6.
- Page 17 (5) Press the key to store the scanned CTCSS code and exit the scan to return to the previous menu. In standby mode, the icon will be displayed on the top line of the screen. Press and hold the PTT key to make a callback. To search for a DCS code, do the following: (1) In VFO mode, enter a known frequency, such as 144.525.
- Page 18 (5) Use the keys to OFF or ON. (6) Press the key to confirm. (7) Press to return to the previous menu. The dual watch function is turned on, and the icon is displayed on the top line of the screen. ·Repeat the above operation, select "OFF", the dual watch function is disabled, and the icon on the top line of the screen disappears.
- Page 19 (2) Press V/M key to set the radio to VFO mode, and the VFO icon is displayed. [1] [3] [1] [0] Deletes Prior Data in channel (Ex. 10) 123.0 Selects desired RX encode tone (Ex 123 CTCSS) 123.0 Selects desired TX encode tone (Ex 123 CTCSS) (6) Enter RX frequency (Ex.
- Page 20 information. ·GPS on/off settings Set path: + 5 + + 1: Press the key to select whether to turn GPS on/off. *After turning on the position system, the screen displays the icon ·Time zone settings: Set path: + 5 + + 2: Press the key to select the correct time zone.
- Page 21 -Disable transmission during waiting for reception. -If the other party receives your request, they will reply with your location information. -The red center point represents your position, the flashing red dot within the circle represents the position of the other side, and the bottom left corner is the reference distance between two radios.
- Page 22 You can read and write frequency to the terminal through BAOFENG radios APP. Use your Android phone to download and install B AOFENG radios APP. After the APP is opened, allow the Bluetooth of the cell phone and open the positioning function, select the brand Baofeng in the APP, select the model of radios UV32 Pro Series, connect the radios, click radios, prompt the connection success and return to the homepage, then you can read and write the frequency.
- Page 23 Appendix A. – Trouble shooting guide Phenomena Analysis Solution The battery may be installed improperly. Remove and reattach the battery. The battery power may run out. Recharge or replace the battery. You cannot turn on the radio. The battery may suffer from poor contact caused by dirty or Clean the battery contacts or replace the battery.
- Page 24 Appendix B. - Technical Specifications GENERAL Channel Capacity 1000/10 Bank Channel Spacing 25.0 KHz/12.5 KHz Input Voltage 7.4 VDC Battery Life: 5% TX, 5% RX, 90% Standby Li-on: 18 hours @ 5 watts Operating temperature Antenna Impedance Radio Dimensions (not including antenna) 182×67×41mm Radio Weight 350 g (with Li-ON battery)
- Page 25 Appendix C. - Shortcut Menu operations Menu Name Setting Description A Bank is a group of channels grouped together. The radio has 10 Banks. A BANK BANK 1 Channel1-Channel100 Bank can have the maximum of 100 channels. Freq Ranger NNNNnnn Input VFO range lower and upper frequency Time Time Operation - scanning will resume after a fixed time has passed...
- Page 26 When the VOX is enabled, set up the VOX delay to help to extend the VOX Delay 0.5……2.0s transmission time to avoid stopping a transmission too early. 0.5s-2s, Step 0.1 second. a total of 16 times offered. Allow continuous launch, launch time is not limited 15;30;45…180 Maximum allowed time for transmission while holding down the PTT key.
- Page 27 No DTMF Side Tones are heard DT-ST Side Tones are heard only from manually keyed DTMF codes DTMF-ST ANI-ST Side Tones are heard only from automatically keyed DTMF codes DT+ANI All DTMF Side Tones are heard No ID is sent. The selected S-CODE is sent at the beginning PTT-ID The selected S-CODE is sent at the ending...
- Page 28 View channel name, allows to rename the current channel. Press the CH.NAME Channel 1 key to switch the input method, allowing the input of letters, numbers and symbols. View the current channel Receiver frequency, allow to change the current RX Frequency frequency.
- Page 29 Declaración de conformidad Baofeng y Pofung declaran por la presente que el tipo de equipo de radio que figura en las Especificaciones técnicas cumple con la Directiva 2014/53 / EU. El texto completo de la Declaración de conformidad de la UE está disponible en el siguiente enlace: http://www.pofung.cn/download.asp?EnBigClassName=EU%20DOC. A través de su servicio de ayuda local de Baofeng, su distribuidor donde compró...
- Page 30 Dichiarazione di conformità Baofeng e Pofung dichiarano con la presente che il tipo di apparecchiatura radio elencato nelle Specifiche Tecniche è conforme alla Direttiva 2014/53/EU. Il testo completo della Dichiarazione di Conformità UE è disponibile al seguente link: http://www.pofung.cn/download.asp?EnBigClassName=EU%20DOC. Tramite il tuo helpdesk Baofeng locale, il tuo rivenditore da cui hai acquistato questa radio o invia un'e-mail a wangjianhui@baofengradio.com.
- Page 31 La banda di frequenze su cui opera questo dispositivo è amministrata da limitazioni e/o permessi per il loro utilizzo. Di conseguenza, nei Paesi UE citati nella scheda, gli operatori devono consultare le autorità preposte. In particolare, devono possedere una licenza o una frequenza assegnata loro dalla rispettiva autorità...
- Page 32 -29- -29-...
- Page 33 Disclaimer The accuracy and completeness of the contents are sought in the process of compilation, but we do not bear any responsibility for the possible errors or omissions. With the continuous development of technology, we reserve the right to change the design and specification of the product without notice. No copy, modification, translation and dissemination of this handbook may be made in any form without the prior written authorization of our department.
Need help?
Do you have a question about the UV-32 Series and is the answer not in the manual?
Questions and answers