Sharp ER-A440 Service Manual page 67

5) PLU PRESET PRICE SETTING
Mode: PGM1/PGM2
PLUn
XXXXXX PLU
PLU code
XXXXXX: PLU CODE (1 to 999999)
YYYYYY: UNIT PRICE (6 digits)
If the record of entered PLU code is not in PLU file at this program-
ming, it will be created in PLU file.
MRS = 0
If the [PLU] or [PLUn] key is depressed, programming mode is
changed from "PRICE PROGRAMMING" to "ATTRIBUTE PRO-
GRAMMING" and changed to "PLU ASSOCIATION PROGRAM-
MING" by depressing the same key again.
(Caution!!)
The associated department is changed if the operater depress
[DPTn] key instead of [PLUn] key by mis-operation at this timing.
6) PLU ASSOCIATION TO DEPARTMENTS
Mode: PGM1/PGM2
PLUn
XXXXXX PLU
PLU code
XXXXXX: PLU CODE (1 to 999999)
YY: Dept. code (1 to 50)
If the record of entered PLU code is not in PLU file at this program-
ming, it will be created in PLU file.
MRS = 01
If the [PLU] or [PLUn] key is depressed, programming mode is
changed from "PRICE PROGRAMMING" to "ATTRIBUTE PRO-
GRAMMING" and changed to "PLU ASSOCIATION PROGRAM-
MING" by depressing the same key again.
(Caution!!)
The associated department is changed if the operater depress
[DPTn] key instead of [PLUn] key by mis-operation at this timing.
Triple depression of [PLU] or [PLUn] key is necessary for the
first time.
7) PROGRAMMING OF PLU/SUBDEPT
Mode: PGM2
PLUn
PLU
XXXXXX
PLU code
XXXXXX: PLU CODE (1 to 999999)
A: Sign
+
–
Not changed
YYYYYY ST TL
for next code
PLU delete
VOID
DPTn TL
Not changed
YY ST
for next code
Not changed
TL
ABCDEFGH
for next code
A
0
1
B: Taxable6
Non taxable
Taxable
C: Taxable5
Non taxable
Taxable
D: Taxable4
Non taxable
Taxable
E: Taxable3
Non taxable
Taxable
F: Taxable2
Non taxable
Taxable
G: Taxable1
Non taxable
Taxable
H: Amount entry type
Inhibited
Open
Preset
Open and preset
Delete
If the record of entered PLU code is not in PLU file at this program-
ming, it will be created in PLU file.
MRS = 00000002
If the [PLU] or [PLUn] key is depressed, programming mode is
changed from "PRICE PROGRAMMING" to "ATTRIBUTE PRO-
GRAMMING" and changed to "PLU ASSOCIATION PROGRAM-
MING" by depressing the same key again.
(Causion!!) The associated department is changed if the oper-
ater depress [DPTn] key instead of [PLUn] key by
mis-operation at this timing.
Double depression of [PLU] or [PLUn] key is necessary for the
first time.
8) PROGRAMMING RATE FOR %KEY.
Mode: PGM1/PGM2
Not changed
*
%n XXX.XX
XXX.XX: 0.00 to 100.00
MRS = 0.00%
If the same [%n] key is depressed, programming mode is changed
from "RATE PROGRAMMING" to "FUNCTION PROGRAMMING"
(from "FUNCTION PROGRAMMING" to "PRICE PROGRAM-
MING").
2 – 21
B
0
1
C
0
1
D
0
1
E
0
1
F
0
1
G
0
1
H
0
1
2
3
4
ST TL