Advertisement
1
At this time, check the three parts shown in the figure below fit.
A
Especially, for the right panel, take care so that the metallic bar protruding from the main chassis fits the
both of stage link lever and white resin part.
B
* In this operation, take notice that the cylinder cam whose mark is matched in step 2 may jolt out
of alignment. If it jolts out of alignment, reposition the key groove and mark.
C
6 Place the tray. At this time, the tray pin should be inserted to the location shown in the figure.
D
E
F
54
1
2
Left front
Right front
State of attached tray
2
3
Right panel
CX-3168
3
4
4
Advertisement
