Advertisement
1
3.5 HOW TO REMOVE THE LOAD FRAME
A
1 Remove the springs from both sides of the roller. Remove the roller.
2 Desolder and remove the flexible cable.
3 Remove the screws which are used to secure the load frame at four points. Remove the load frame.
Note: Remove springs from metal plate hook, but not necessarily from the resin collar.
B
C
D
3.6 HOW TO REMOVE THE CRG
(ONLY FOR REFERENCE SINCE THIS PROCEDURE IS HARD TO BE
COVERED BY OUR SERVICE)
E
1 Slide the part with which the stage link lever is in mesh toward you. Turn the CRG to move it to the play
position.
2 Remove the resin part and springs.
3 Remove the CRG.
F
42
1
2
1
Screw
Screw
2
3
Screw
Screw
CX-3168
3
4
2
4
Advertisement
