Engine warning lamps
Malfunction indicator lamp
Powertrain warning lamp
All vehicles
If either lamp illuminates when the engine
is running, this indicates a fault. The
engine will continue to run but it may
have limited power. If it flashes when you
are driving, reduce the speed of your
vehicle immediately. If it continues
to flash, avoid heavy acceleration or
deceleration. Have the system checked
by a properly trained technician
immediately.
WARNING
Have this checked immediately.
If both lamps illuminate together, stop
your vehicle as soon as it is safe
to do so (continued use may cause
reduced power and cause the engine to
stop). Turn the ignition off and attempt to
restart the engine. If the engine restarts
have the system checked by a properly
trained technician immediately. If the
engine does not restart the vehicle must
be checked before continuing your
journey.
Glow plug indicator
See Starting a diesel
engine (page 63).
Instruments
Headlamp indicator
Hill start assist indicator
E95339
if it does not illuminate this indicates that
the system has been disabled. Your
Ford Dealer can re-enable it. During a
malfunction, the system switches off and
it will not illuminate while driving.
Ignition warning lamp
unnecessary electrical equipment.
Have the system checked by a properly
trained technician immediately.
Low fuel level warning lamp
The arrow adjacent to the fuel pump
symbol tells you on which side of your
vehicle the fuel filler cap is located.
Main beam indicator
headlamp flasher.
-49-
It will illuminate when you switch
the headlamp dipped beam or
the side and tail lamps on.
While driving, it illuminates
during activation of the system.
After switching on the ignition,
If it illuminates when you are
driving, this indicates a
malfunction. Switch off all
If it illuminates, refuel as soon as
possible.
It will illuminate when you switch
the headlamp main beam on.
It will flash when you use the
Need help?
Do you have a question about the Transit VM 430 and is the answer not in the manual?
Questions and answers