Direct Access Tuning - Kenwood KDC-X717 Instruction Manual

Kenwood cd-receiver instruction manual
Hide thumbs Also See for KDC-X717:
Table of Contents

Advertisement

1
Select the band for auto memory entry.
2
Press the AME button for at least two seconds to start auto
memory entry.
The numbers of the preset station buttons are shown in order.
When all the stations in a certain band are stored in the preset
memory, the auto memory entry stops. The tuner then plays
the last station received.
Recalling a Preset Station:
Press the preset station button (#1-6) for the desired station.
The number of the recalled station is displayed.
Function of the KDC-X917/KDC-X817/KDC-X717

Direct Access Tuning

When you know the frequency of the station that you want to
listen to, you can input it directly for quick access.
1
Select the band by pressing the FM or AM button.
2
Press the DIRECT button.
"----" is displayed for 10 seconds.
If you make no input in the 10-second period, direct access
tuning is automatically canceled.
3
Enter the frequency of the desired station.
If you want to listen to an FM station at 92.1 MHz, for
example, press 0, 9, 2, and 1.
If you want to listen to an AM station at 810 kHz, for example,
press 0, 8, 1, and 0.
NOTE
• You cannot enter frequencies above or below what a band can
receive.
• FM frequencies can only be input in 0.1 MHz steps, and not
0.01 MHz steps.
Canceling Direct Access Tuning:
Press the DIRECT button again.
(
Function of remote)
— 21 —

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kdc-9017Kdc-x917

Table of Contents