Table of Contents
Advertisement
Function set system
CD OPEN/CLOSE
DSP
DPX-5010
7
7
ATT
EQ
7
7
DISP
7
7
7
1
2
3
4
5
DIR
Function mode and setting display
FNC
TAPE OPEN/CLOSE
SRC
7
RETURN
ANGLE
7
FNC
+
FM
–
AM
6
AUD
4
¢ AM
FM
AUTO indicator
— 30 —
Function Set System
To accommodate a greater number of functions, a function set
system has been employed for making settings. Press the FNC
button to enter the function set mode and then display the
function to make the setting.
1
Select the mode that you want to make the setting of the
function.
2
Press the FNC button.
"Function Set" is displayed when the function set mode is
entered.
The function that you can adjust is indicated with the current
settings displayed.
3
Selecting function to set
Press the ¢ button to search through the functions until you
see the one you want to adjust in the display.
Press the 4 button to search through the functions
backward.
Example: If you want to the setting of the touch sensor tone
function from on to off, first search through the
functions until you see "BEEP On" in the display.
4
Changing setting for currently displayed function
Press either the AM or FM button.
The setting will change for each function.
Example: The setting of the touch sensor tone will switch from
on to off, and "BEEP Off" is displayed.
5
Ending the function set mode
Press the FNC button.
Hide quick links:
Advertisement
Table of Contents
