Dsp Setting Preset Memory; Graphic Equalizer Features - Kenwood DPX-5010 Instruction Manual

DSP features

DSP Setting Preset Memory

Up to three sets of the DSP settings and conditions you
adjusted can be stored in the memory, and then you can recall
them with the single touch of a button.
1
Press the DSP button. "DSP CTRL" is displayed once the DSP
control mode is entered.
The DSP indicator blinks during the DSP control mode.
2
Make the DSP settings and adjustments that you want to store
in the memory.
3
Press the button (#1-3) that you want to use for the DSP
settingsand adjustments for at least two seconds.
The button number blinks once in the display to indicate that
the data has stored.
4
Press the DSP button to end the DSP control mode.
Recalling a DSP settings and adjustments you stored:
1
Press the DSP button. "DSP CTRL" is displayed once the DSP
control mode is entered.
The DSP indicator blinks during the DSP control mode.
2
Press the preset button (#1-3) for the desired DSP settings and
adjustments.
3
Press the DSP button to end the DSP control mode.

Graphic Equalizer features

EQ
CD OPEN/CLOSE
DSP
DPX-5010
7
7
ATT
EQ
7
7
DISP 7
7
1
2
3
DIR
DISP #1 #3
#2 KBS
KBS name/Spectrum analyzer name/Equalizer frequency and level display
Equalizer/Analyzer display
— 24 —
TAPE OPEN/CLOSE
SRC
7
RETURN
ANGLE
7
FNC
FM
–
AM
7
4 5 6
AUD
4 ¢
#5
#6
AM
+
FM