Hands-Free Control - Kenwood DNX6040EX Instruction Manual

Registering Bluetooth unit PIN
code
You can set the PIN code to the Bluetooth
unit. The code is acquired when registering
(pairing) from the cell-phone or audio player
side.
1
Touch [SET] of [Receiver PIN Code] in
the Bluetooth SETUP screen.
Receiver PIN Code Set screen appears.
2
Enter a code number and touch
[Enter].
NOTE
• If you want to cancel the registration, touch
[Cancel].
• If you want to clear the entered number, touch
[Clear].
Bluetooth output setup
You can select speakers to output the sound
from cell-phone (such as phone call voice
and ringing tone) and Bluetooth audio
player.
1
Touch [Front Only] or [All] of
[Bluetooth HF/Audio] in the Bluetooth
SETUP screen.
Front Only
Outputs from the front speakers.
All
Outputs from all speakers.

Hands-Free Control

You can perform various setup about hands-
free function.
1
Press the <TEL> button.
Hands Free screen appears.
2
Touch desired key in the Hands Free
screen.
See the following section for each setting.
• Set up the Hands-Free system (P.64)
• Set up SMS (P.65)
• Preset the phone number
• Register your voice
• Register key word voice
Return to the Top page
Bluetooth Operation
(P.67)
(P.68)
(P.69)
63