Sirius/Xm Basic Operation - Kenwood DNX6040EX Instruction Manual

Return to the Top page
Radio, HD Radio, SIRIUS, XM

SIRIUS/XM Basic Operation

Most functions can be controlled from the source control screen.
NOTE
• Set the remote controller mode switch to AUD mode before starting operation, see
mode (P.91).
• To use Satellite radio, the optional accessory is necessary.
For SIRIUS tuner, a conversion cable CA-SR20V is necessary.
For XM tuner, an XM interface box KCA-XM100V is necessary.
• SIRIUS and XM are for North American sales area only.
• The screen shot below is for SIRIUS. It may be different from the one for XM.
Simple Control screen
1
2
1 Information display/Control switching area
Displays the following information.
• [SR1], [XM1], etc.: Band display
• Preset #: Preset number
• #CH/CH#: Channel display
Touch to switch between the Simple Control and List Control screen.
2 Multi function key
Touch to switch the multi function menu. For details on the menu, see
3 Preset key/Multi function menu
Recalls the memorized channel. When touched for 2 seconds, store the current receiving station or
channel in memory.
When switched, various functions can be performed by using keys in this area.
For details on the menu, see
4 Sub function key
Touch to display "Sub function menu" (6 in this table).
5 Music information
Displays the information of the current music: channel name, song title, artist name, etc.
46 46
3 4
Multi function menu (P.47).
Switching the operation
List Control screen
2 3
Multi function menu
1
5
6
7
(P.47).