Advertisement
<Instructions for Removing the Plasma Display, cont'd.>
Danger
3. Remove the Frame Fastening Screws, Spacer Rings, Flat Washers, and Spring Washers of the two Frame
Fastening Screw Components at the upper left and right of the Wall Mounting Unit.
4. Push up the heads of the screws in the Frame Attachment Lever components at the bottom left and right of the
Wall Mounting Unit until they come into contact with the Frame. Then tilt the plasma display 90 forward and,
without changing the inclination of the plasma display, pull the display out horizontally.
Frame Removal Lever Screws
This task must be performed by at least two persons.
Frame Fastening Screws
15
Advertisement
