Advertisement
<Instructions on Removing the Plasma Display>
Danger
1. Hold the upper middle of the plasma display and set the Angle Adjustment Lever to 0 .
＊ If the Angle Adjustment Lever has been fastened, remove the Angle Adjustment Lever Lock Screw before
performing this task.
2. Confirm that the Frame Rotation Shaft Screws at the left and right bottom of the Wall Mounting Unit are securely
fastened.
14
This task must be performed by at least two persons.
Angle Adjustment
Lever
Angle Adjustment Lever
Lock Screw
Rotation Shaft Screws
Advertisement
