Status monitor mode
The inverter can be moved through each of the modes by pressing the MODE key.
4
MON
Monitoring of
operation status
Refer to section 8.2
The mode for monitoring all inverter status.
Allows monitoring of frequency command value, output current/voltage and
terminal information.
Refer to chapter 8.
PRG
RUN
MODE
fr-f
Status monitor mode
f60.0
0.1
Frequency setting method
Refer to section 3.2.2
0.0
Standard monitor mode
( At power source on )
PRG
MODE
D-2
MODE
y
auh
Setting monitor mode
How to search and set
parameters
Refer to section 4.2
aua
E6581611