All manuals and user guides at all-guides.com 1 Warning Caution: • Pb free solder has a higher melting point that standard solder; Typically the melting point is 50 - 70 °F (30 - 40 °C) higher. Please use a soldering iron with temperature control and adjust it to 750 ± 20 °F (400 ± 10 °C). In case of using high temperature soldering iron, please be careful not to heat too long.
All manuals and user guides at all-guides.com 3 Troubleshooting Guide 3.1. Troubleshooting Guide...
Page 4
All manuals and user guides at all-guides.com...
Page 5
All manuals and user guides at all-guides.com...
Page 6
All manuals and user guides at all-guides.com...
Page 7
All manuals and user guides at all-guides.com 3.2. Trial Operation (after checking Troubleshooting Guide). 3.2.1. Assembly • Confirm if there is no gap between housing A, B and C by pinching lead wires. • There is no dust or deformation on battery terminals. 3.2.2.
All manuals and user guides at all-guides.com 4 Disassembly and Assembly Instructions * To reduce the risk of injury, always remove battery pack before removing/installing the tool. * To assemble the tool, start with 4-9 and proceed to 4-1 4.1. Removing the Housing.
Page 9
All manuals and user guides at all-guides.com 4.2. Removing the interior components. 1. Disconnect the LED assembly 2-pin connector from the module assembly. * Precautions when attaching the 2-pin connector. Check whether the claw on the connector is engaged securely with the mating side. 2.
Page 10
All manuals and user guides at all-guides.com 4.5. Removing the Fixation cover assembly, driving shaft assembly and motor mounting plate. 1. Remove the motor mounting plate. 2. Remove the thrust plate from the driving shaft assembly from the fixa- tion cover assembly. 3.
Page 11
All manuals and user guides at all-guides.com 4.7. Removing the module assembly, switch assembly and battery terminal. 1. Disconnect the switch's 6-pin connector from the module assembly. 2. Pull the faston terminal directly out from the switch assembly. * Exercise care not to bend the terminal fitting. 3.
Page 12
All manuals and user guides at all-guides.com 4.8. Inserting the module assembly, switch assembly and battery terminal. 1. Connect the switch's 6-pin connector from the module assembly. 2. Attach the faston terminal. * Exercise care not to bend the terminal fitting. 3.
Page 13
All manuals and user guides at all-guides.com 4.9. Attaching the module assembly and fixation cover assembly from the housing A.
Page 14
All manuals and user guides at all-guides.com 4.10. Wiring and assembly points.
All manuals and user guides at all-guides.com Model No. : EY75A7 Exploded View...
Page 17
All manuals and user guides at all-guides.com Model No. : EY75A7 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks WEY75A7K3079 HOUSING ABC SET (For EUROPE) WEY75A7K3070 HOUSING ABC SET (For OCEANIA) WEY75A7K3107 PROTECTOR WEY75A7K3958 OPERATION PLATE...