Erasing A Track (Erase) - JVC XM-EX90 Instruction Manual

Erasing a track (ERASE)

A desired track can be erased from the MD. The track numbers after the erased track are
decremented automatically.
34
XM-EX90
EDIT
SET
SET
1
Press EDIT to select "ERASE".
Each press of EDIT switches the editing functions as
follows.
DIVIDE
MD total playing time display
2
Press SET.
"1" for track number 1 blinks on the display.
Blinks.
3
Select the track number to be erased, then
press SET.
Select the track number by pressing </4 or ¢/>.
Blinks.
Example) When track No. 2 is to be erased
Example) When SET is pressed
• If you selected a wrong track number, press CANCEL
and select the correct track number.
• If the display shows "TRACK PROTECTED", the
selected track has been protected against accidental
erasure by other component than the MD recorder in
use. If you still want to erase the track, go to step 4.
If you will not erase it, press EDIT.
JOIN MOVE
ALL ERASE
Blinks.
Blinks.
Blinks
Blinks.
ERASE
1 2 3 4 5
6
Blinks.
1 2 3 4 5
6
Blinks.
1 2 3 4 5
6
Blinks.
1 2 3 4 5
6