JVC XM-EX90 Instruction Manual page 33

ENTER
INPUT
5
Press ENTER.
The change made above is entered temporarily in the
memory. The display shows "EDITING".
Press 0 to eject the MD.
6
The data in the memory is written in the MD before it is
ejected.
The display shows "UTOC writing" during MD write
operation.
• Be careful not to apply impact to the MD recorder
during writing data in the memory in the MD.
Otherwise the recording may be unplayable later.
• The data in the memory is written in the MD also
when the power is switched to the STANDBY mode
while "EDITING" is being displayed.
To exit editing:
Press EDIT before pressing ENTER in step 5.
1 2 3 4 5
6
33
XM-EX90