Fujitsu Waterstage Split Comfort 5 Series Installation Manual page 52

Line Function
850 I Floor curing function
- Off : Early interruption of the current programme, programme inactive.
- Operational heating.
- Heating ready for occupation.
- Operational heating + ready heating.
- Ready heating + operational heating.
- Manual: Manual mode enables you to programme your own concrete slab drying time.The function ends automatically
after 25 days.
55
50
45
40
35
30
25
20
0 1 5
X
Heating ready for occupation
1
Operational heating + Heating ready for occupation
fi g. 51 - Diagram of the concrete slab drying programmes
851 I Floor curing setpoint manually
(if line 850 = manual)
This function enables you to set the custom concrete slab drying temperature. This temperature remains fi xed.
The concrete slab-drying programme stops automatically after running for 25 days.
856 I Floor curing day current
857 I Floor curing day completed
900 S Operating mode changeover
Operating mode at end of concrete slab drying period
Cooling circuit 1
If the installation is fi tted with the cooling kit (Only with the cooling kit option).
901 U Operating mode
902 U Comfort cooling setpoint
903 U Reduced setpoint
908 I Flow temp setp at OT° 25°C
909 I Flow temp setp at OT° 35°C
912 I Cooling limit at OT°
913 S Lock time at end of heating / cooling
918 S Summer comp start at OT°
919 S Summer comp end at OT°
920 S Summer comp setp increase
923 S Flow temp setp min OT° 25°C
924 S Flow temp setp min OT° 35°C
- 52 -
(fi g. 51)
10 18 1
Operational
Setting range
or display
5 7
Day
heating
25
0... 95 °C
0... 32
0... 32
None, Protection mode,
Reduced, Comfort, Automatic
Protection, Automatic, Reduced,
Comfort
5... 40 °C
5... 40°C
6... 35 °C
6... 35 °C
--, 8... 35 °C
--, 8... 100
20... 50 °C
20... 50 °C
--, 1... 10 °C
6... 35 °C
6... 35 °C
Waterstage Split Comfort DHW Serie / INSTALLATION / 2125 - EN
Setting
increment
Please comply
standards and instructions
of the manufacturer
building ! A good performance
of this function is only possible
with an installation correctly
implemented
electricity and adjustments) !
This function can be stopped
by anticipation when setting the
adjustment on "Off ".
1 °C
1
Protection
0.5 °C
0.5 °C
0.5 °C
0.5 °C
1 h
1 °C
1 °C
1 °C
0.5 °C
0.5 °C
Basic
setting
Off
with the
of the
(hydraulic,
25 °C
0
0
Reduced
24 °C
26 °C
20 °C
16 °C
24 °C
24 h
26 °C
40 °C
4 °C
18 °C
18 °C