Licenses - Bosch FLEXIDOME panoramic 5100i User Manual

FLEXIDOME panoramic 5100i | FLEXIDOME
panoramic 5100i IR
The camera functions and parameters can be updated by uploading new firmware. To do this,
the latest firmware package is transferred to the device via the network. The firmware is
installed there automatically. Thus, a camera can be serviced and updated remotely without
requiring a technician to make changes to the device on site. The latest firmware can be
obtained from your customer service center or from the download area.
Update server
The address of the update server appears in the address box.
1.
2.
Firmware
To update the firmware:
1.
2.
3.
The new firmware is unpacked and the Flash memory is reprogrammed. The time remaining is
shown by the message going to reset Reconnecting in ... seconds. When the upload is
completed successfully, the device reboots automatically.
Upload history
Click Show to view the firmware upload history.
Configuration
Save configuration data for the device to a computer and load saved configuration data from a
computer to the device.
To load configuration data from the computer to the device:
1.
2.
3.
To save the camera settings:
1.
2.
3.
Maintenance log
Download an internal maintenance log from the device to send it to Customer Service for
support purposes. Click Download and select a storage location for the file.
4.8.2

Licenses

This window activates more functions with use of an Activation key. An overview of the
Installed licenses is shown. Also, the Installation code of the unit is shown.
Click Set to apply the changes.
Bosch Security Systems B.V.
Click Check to make a connection to this server.
Select the appropriate version for your camera to download the firmware from the server.
First, store the firmware file on your hard disk.
Enter the full path for the firmware file in the field or click Browse... to locate and select
the file.
Click Upload to begin transferring the file to the device. The progress bar allows
monitoring of the transfer.
Click Browse.... A dialog box appears.
Make certain that the file to be loaded comes from the same device type as the device to
be reconfigured.
Locate and open the desired configuration file. If the configuration file is password-
protected, enter the password.
Click Upload.
The progress bar allows monitoring of the transfer. The time remaining is shown by the
message going to reset Reconnecting in ... seconds. When the upload is completed
successfully, the device reboots automatically.
Click Download. A dialog box appears.
Enter a password to protect the configuration file.
Enter a file name if required and save the file.
User manual
Configuration | en
2022-01 | V01 | F.01U.385.628
47