Bluetti EB200P User Manual page 9

Warm tip:
touch button by fingernail lightly until it "beeps".
on it.
(1) When press the power button,it will enter the main interface of the LCD
display screen:
(Mainpage)
a.PV/Car charging display
b.BMS Info
c.Date/Time
d.DC load Info
(2) Click the settings button in the main interface (Figure 2) to enter the setting
interface as follows (Figure 3) :
Warm tip: Please enter the setting interface to set the date and time according to
the local time zone, and check the output voltage, frequency and other parame-
ters for the first time.
Voltage and Frequency Reference:
DC Input Source: Select the right method you choose to charge EB200P.
ECO Mode: While it`s on, the AC output ports will be automatically turned off if
the load on it is less than 50W over 4 hours.
Press "Next" icon to enter date setting as (Figure 3):
Backlight and Sleep time: set the proper value as your need for power saving.
Date and time: 2000-00-00 00 00 00, tap the number to set it right.
((Figure 1))
e.DC ON/OFF Switch
f. AC ON/OFF Switch
g.Adapter charging display
h.AC load Info
EU output: 230V/50Hz
UK output: 230V/50Hz
- 06 -