BLUETTI EB70S 716Wh/800W Portable Power Station Manual

Introduction

Thank you for making BLUETTI a part of your family.
From the very beginning, BLUETTI has tried to stay true to a sustainable future through green energy storage solutions for both indoor and outdoor use while delivering an exceptional eco-friendly experience for our homes and our world.
That's why BLUETTI makes its presence in 70+ countries and is trusted by millions of customers across the globe.

Before You Begin

• The user manual contains instructions and notes on the operation and use of this unit.
• BLUETTI recommends that you use genuine accessories from BLUETTI.
• BLUETTI shall not be responsible for any damage or expense that might result from the use of parts other than genuine parts from the BLUETTI.
• For your safety and benefit, please read carefully before using and keep it handy for future reference.

Safety Instructions

Failure to follow these guidelines may cause damage to your unit and injury to yourself or others.

• Keep this unit away from fire, humidity and dust.
• Make sure the place where you are using the unit is well ventilated and spacious.
• DO NOT place the unit on an unstable or tilted surface.
• Turn off the unit IMMEDIATELY in case of malfunction.
• When not using the unit for extended periods of time, power off the unit and disconnect the
  AC adapter from the outlet.
• Recommended storage temperature: 14-113^OF/-10-45^OC.
• Charge the unit to 80% SOC every 3-6 months for long-term storage.

What's In The Box

Standard Packaging

* AC Adapter: 120cm/47in.
Car Charging Cable: 72cm/28in. Cigarette lighter port to DC7909.
Solar Charging Cable: 150cm/59in. MC4 to DC7909.

Note: Package details are subject to change without prior notice.

Product Overview

1. Charging Port
2. LCD Screen
3. Wireless Charging Pad
4. L ED Lamp Button
5. LED Lamp
6. DC Power Button
7. USB-C Port
8. USB-A Port
9. DC5521 Port
10. Cigarette Lighter Port
11. AC Power Button
12. AC Outlet

Specifications

Operation

LCD Screen

1. ECO Mode
2. Battery Capacity
3. Input Power
4. Low-battery Alert
5. Temperature Anomaly Alert
6. Output Power
7. Overload Alert
8. Short-circuit Alert

Powering On/Off

Powering on: Press the AC/DC Power Button to start up corresponding output.

*The LCD screen is on for about 30-60 seconds. Please enable at least one of these ports (AC/DC) if you want the display to stay on longer.

Note: Please turn on the DC power to enable the wireless charging.

Powering off: Press and hold power buttons to shut down corresponding output.

Mode

Setting Mode: When the AC output is off, press AC and DC power buttons simultaneously and the frequency indicator flashes.
ECO Mode^[1]: Under 'Setting Mode', press the DC power button to turn it on/off.

Setting

AC Frequency^[2]: Under 'Setting Mode', press the AC power button to switch.

Charging

AC Charging

Simply plug the EB70S into a standard wall outlet and start charging.

¹ When on this mode, the AC output will automatically turn off after 4-hour low (≤10W) or no load to save power.
² AC Frequency: The number of alternating cycles per second in an AC sine wave. The utility frequency is usually 50/60Hz.

PV Charging

Connect the solar panels (in series or parallel) to EB70S via the solar charging cable.
Note: Please make sure your solar panels comply with:


³ OCV: Open circuit voltage. The maximum voltage that the solar panel can produce with no load on it.

Car Charging

Connect the EB70S directly to the vehicle plug-in cigarette lighter port via the car charging cable.

Generator Charging

Connect the AC adapter input plug to the generator while the output plug goes to the charging port of EB70S.

Discharging

716Wh × DoD × η ÷ (load power) = charging time (estimated)

Note: DoD refers to the Depth of Discharge, η is the local inverter efficiency. DoD=90%, η=90%.
Load power and charging time are measured in Watt and Hour.

FAQs (Frequently Asked Questions)

Q: How do I know whether my devices will work well with this product?
A: Please evaluate the total constant load of your appliances. If it doesn't exceed the Max. output power of EB70S, you can use this power station to charge.

Q: Can I use third-party solar panels to charge this product?
A: Yes, you can. As long as the specs of solar panels you're using fall in below range:
OCV: 12-28V
Input Current: 8A Max.
Input Power: 200W Max.
With the same power connector (MC4 or Anderson)

Q: Is there a button to turn on/off the wireless charging?
A: Yes. Press the DC Power Button to enable the wireless charging.

Q: Can it charge and discharge at the same time?
A: Yes. It supports pass-through charging. EB70S comes with the premium LiFePO4 battery and proprietary Battery Management System to ensure that it can charge and discharge at the same time.

Q: How can I clean this EB70S power station?
A: Using dry and non-abrasive cloths to wipe will be perfect.

Technical Support

Should you require any further assistance, please do not hesitate to contact BLUETTI service team.

BLUETTI POWER INC

Web: https://www.bluettipower.com/
Tel: 833-988-3663 / 702-463-4792
Mail: service@bluettipower.com
Add: 6185 S Valley View Blvd Ste D. Las Vegas, NV 89118.

Videos

Bluetti EB70s - Review and Test video

Documents / Resources

References

• BLUETTI: Portable Power Station, Solar Generator Kit

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download BLUETTI EB70S 716Wh/800W Portable Power Station Manual