Moving the product ..................16 Levelling the product ..................17 Electrical connection ..................18 Maintenance ....................19 Adjusting the play of the saddle ..............22 Adjusting the play of the handlebar ...............24 Technical assistance ..................25 Storing the product ..................26 Disposing of the product .................27 SKILLBIKE...
Any other use should be considered incorrect and therefore dangerous. Do not use any accessories other than those recommended by Technogym. Never turn on the product if it has a damaged cable or plug, if it is not working correctly, if it has been knocked over or damaged, or if it has fallen into water.
Page 4
Never drop or insert any object into any opening. To disconnect the power, remove the plug from the socket. SAVE THESE INSTRUCTIONS Warnings Risk Of Electric Shock. Do Not Disconnect Under Load. Do not connect to a circuit operating at more than 150V to Ground. SKILLBIKE...
Do not attempt any maintenance work on the product other than the operations described in the user manual. The installation, maintenance and setting operations must be carried out by qualified Technogym staff or persons authorised by Technogym. The electrical system must conform to the standards and legal requirements in the country of use.
Page 6
PERSONAL SAFETY Technogym is not responsible for any harm due to any failures or damage caused by unauthorised maintenance, misuse, accident, negligence, improper assembly or installation, debris resulting from any construction activities in the area where the product is used, rust or corrosion as a result of the product’s location, alterations or modifications without Technogym’s written authorisation or for failure on your part to use, operate and maintain the...
F - Serial number and date of manufacture G - Product model The SKILLBIKE is a commercial device, designed for use in residential and professional environments. It is classified as a class SA device according to ISO EN 20957-1. Technogym S.p.A. via Calcinaro 2861, Cesena (FC)
H Lever for adjusting the handlebar L Water bottle holder M Display N Telephone holder The receiver for the ANT+ chest strap can be installed in the time trial handgrips. The product cannot receive heart rate signals from analogue straps. SKILLBIKE...
To adjust the height of the handlebar, use the adjustment lever (C). Stand alongside the handlebar. Lift up the lever (C). Move the handlebar to the right height. Lock the lever (C) at the bottom, in its original position. SKILLBIKE...
Page 10
Keep your feet lined up properly so that they do not scrape against the covers of the product. The SKILLBIKE must only be used for the purpose for which it was designed and made: as a cycle ergometer. Any other use must be considered inappropriate and therefore dangerous.
Page 11
USING THE PRODUCT Make sure you do not have any loose clothing or laces that could get caught in the product. Do not store the product in a vertical position. It may be unstable and it could fall over. SKILLBIKE...
Page 12
USING THE PRODUCT Do not seat, step on or do stretching exercises on the rear protection. Before using the product, read all the warnings on the label. SKILLBIKE...
When you pedal backwards, the noise level will be different from when you pedal forwards. Gear number VIII Sprocket ratio* 36/28 36/23 36/19 36/17 52/21 52/17 52/15 52/13 Metres of development (m)** 2.85 3.48 4.04 4.60 5.41 6.61 7.67 8.73 * Approximate equivalence. ** The measurements refer to 28” wheels. SKILLBIKE...
155 - 205 cm (61" - 81") Noise level Less than 70 dB Protection rating IP 20 from +5°C to +30°C Operating temperature (from +41°F to +86°F) Maximum capacity of water bottle-holder 1.5 kg (3.4 lb) 1542 mm 638 mm SKILLBIKE...
Do not use the product outside. Do not use the product outdoors, where it is exposed to the elements. Ensure that the product does not get splashed by water. Do not place the product in locations with high moisture levels, such as swimming pools, whirlpool tubs and saunas. SKILLBIKE...
MOVING THE PRODUCT The product has two fixed front wheels. To move it, lift it up slightly as shown in the illustrations, then push it forwards or backwards. Before you lift the product, ensure that the handlebar is securely fastened. SKILLBIKE...
LEVELLING THE PRODUCT The product must be level for proper operation. Loosen the locknut (B). Screw or unscrew the foot (A) until the frame is in a stable position. After adjusting, tighten the lock nut (B). SKILLBIKE...
When you connect the product to the electricity supply, you may hear a noise coming from inside, which is caused by the automatic resetting procedure. Warnings Check the state of the power cable periodically. The wall socket must be located in a place where the unit may be easily and safely plugged in and unplugged. SKILLBIKE...
(A) carefully. Do not use chemical products or solvents. Contact the Technogym Technical Support Service for information about any maintenance operations not described in this manual. The safety of the product is assured only on the condition that it is carefully inspected once a week for any signs of damage and/or wear.
Page 20
Remove dust from the grill carefully. Check the level of wear and tear on the In the event of faults, contact the Technogym Technical Support Pedals pedals and ensure that they are securely Every 6 months Service.
Page 21
To adjust the tooth so that it locks properly, contact the Every 6 months (saddle and handlebar) (A) associated lever is working. Technogym Technical Support Service. Horizontal adjustment unit Check that the horizontal movement of Every 6 months Lubricate the stem and post with oil containing PTFE.
Turn the screws (A) and (B) right to tighten them and make the saddle move less easily. Turn the screws (A) and )(B) left to loosen them and make the saddle move more easily. Give each screw 1/8 of a turn each time and see how the saddle moves, then turn it again if necessary. SKILLBIKE...
Page 23
Turn the nut right to tighten it and make the saddle move less easily. Turn the nut left to loosen it and make the saddle move more easily. Give the nut 1/8 of a turn each time and see how the saddle moves, then turn it again if necessary. SKILLBIKE...
Unscrew the screw (B). Remove the indicator (C) and remember which position it was in. Turn the pin (D) clockwise. Put the indicator (C) into the next slot in an anticlockwise direction. Tighten the screw (B). Lower the lever (A). SKILLBIKE...
Via Calcinaro 2861, 47521 Cesena Italy on-site servicing tel: +39 0547 56047 supply of original spare parts. www.technogym.com/Support When you contact the Technogym Technical Support Service you must give the following information: Product model (A) Date of purchase Serial number (B) Precise description of the problem Technogym S.p.A.
-10°C and 70°C and relative humidity between 20% and 90%. For better storage, use the original packing materials. Do not store the product in a vertical position. SKILLBIKE...
European Community may take used electrical and electronic equipment to authorised collection centres. If the product is used for commercial purposes, contact your reseller or the Technogym Customer Service, in the various Countries, to arrange for collection and disposal of waste from electrical and electronic equipment.
Page 28
SKILL LINE SKILLMILL ™ SKILLROW ™ SKILLRUN ™ SKILLBIKE ™ Discover more about SKILL LINE products and SKILLATHLETIC TRAINING at technogym.com SKILLBIKE_en-AB 0SM01088...
Need help?
Do you have a question about the SKILLBIKE and is the answer not in the manual?
Questions and answers