Wall mount bracket kit
Brand
Model #
65PUL7472/F7
SANUS
VLT6-B1
55PUL7472/F7
Your TV meets the VESA standard for wall mounting.
●
Consult with your local dealer for a wall mount bracket
which is compatible with your TV model.
The recommended wall mount bracket kit (sold separately)
●
allows the mounting of the TV on the wall.
For detailed information on installing the wall mount, refer
●
to the wall mount Instruction book.
Funai Corporation is not responsible for any damage to the
●
product or injury to yourself or others if you elect to install
the TV wall mount bracket or mount the TV onto the bracket.
The wall mount bracket must be installed by experts.
●
Screw
VESA size
dimension
15.75 " x
11.81 "
(400 x 300 mm)
M6 x 1.378 "
(35 mm)
11.81 " x
11.81 "
(300 x 300 mm)
Funai Corporation is not liable for these types of accidents
or injuries noted below.
If installed onto a ceiling or slanted wall, the TV and wall
●
mount bracket may fall which could result in a severe injury.
Do not use screws that are longer or shorter than their
●
specified length. If screws too long are used this may cause
mechanical or electrical damage inside the TV set. If screws
too short are used this may cause the TV set to fall.
Do not fasten the screws by excessive force. This may
●
damage the product or cause the product to fall, leading to
an injury.
For safety reasons use 2 people to mount the TV onto a wall
●
mounting bracket.
Do not mount the TV onto the wall mounting bracket while
●
your TV is plugged in or turned on. It may result in an
electrical shock injury.
When installing the unit on the wall, allow this much
space.
: 11.8 " (30 cm)
Top
: 5.9 " (15 cm)
Left and right side
: 3.9 " (10 cm)
Bottom
5
.
English