Use Your Tv; Switching On Your Tv And Putting It In Standby Mode; Adjusting Volume; Switching Channels - Philips 74 Series User Manual

3 Use your TV

Switching on your TV and putting it in
standby mode
TV
Remote
Turns the TV on and off of standby.
Press (POWER) on the TV or the remote, then TV will go to
●
suspend standby.
Press and hold (POWER) on the TV or the remote, then TV
●
will go to standby mode completely.
Note(s)
Energy consumption contributes to air and water pollution. When the
●
AC power cord is plugged in, your TV consumes energy with a very low
standby power consumption.

Adjusting volume

To decrease or increase volume
Press VOL + / – on the remote.
●
VOL + : Volume up
VOL – : Volume down
To mute or unmute sound
Press 2 (MUTE) on the remote to mute the sound.
●
Press 2 (MUTE) again or VOL + / – to recover the original
●
sound.

Switching channels

To change channels, you can do any of the following:
Press CH + / – on the remote.
●
Press H I on the remote for digital channels only.
●
19 .
English
Continued on next page.