Other Features; Automatic Store - Hitachi CMP307XU User Manual

OTHER FEATURES

Automatic Store

Approximately 1 sec. after adjustment is completed, the adjustments will be recorded as shown
in the table below.
Item
Sound volume
Sound balance
Treble
Bass
Mute volume
Input status automatic display
Half tone
Enlargement
Line correction
Three-dimensional Y/C separation
HD signal
Input select
Brightness
Contrast
Gamma correction
Input signal level
Display area
Horizonal position
Vertical position
Dot clock frequency
Dot clock phase
The previously recorded items will be lost.
The signal mode can be identified by the horizontal/vertical sync frequency and the sync signal
polarity. Different signals with which all the elements are the same or similar will be handled as the
same signal.
RGB1 and RGB2 inputs have common elements that can be recorded for each signal mode. Because
of this, when the contents are recorded with RGB1 (or RGB2), there may be loss of adjustment
during RGB2 (or RGB1) reception in the same signal mode.
22
Display Registration condition
VOLUME
BALANCE
TREBLE
BASS
MUTE VOLUME
EASY MENU
One set can be recorded.
HALF TONE
INTERPOLATION
LINE CALE
3D Y/C
COMPONENT
INPUT SELECT
One set can be recorded
BRIGHTINES
during common RGB1, RGB2
CONTRAST
input; one set of two can be
GAMMA
recorded during normal signal
VIDEO LEVEL
reception with common
DISPLAY AREA
VIDEO 1, VIDEO 2 input.
H.POSITION
One group can be recorded
V.POSITION
CLOCK
for each signal mode.
PHASE
Reproduction condition
During normal signal
reception.
During normal signal
reception.
During recording and
when the same signal
mode is detected.