Operating Instructions; Turning Power On And Off - Hitachi CMP307XU User Manual

OPERATING INSTRUCTIONS

Turning Power On and Off

To turn on the set power supply, set the MAIN POWER switch ( ) of the main unit to ON and
then press the SUB POWER button ( ) or the POWER button of the remote control.
To turn off the set power supply, press the SUB POWER button ( ) of the main unit or the
POWER button of the remote control, then set the MAIN POWER switch ( ) to OFF.
For normal operations, leave the main power switch ( ) set to ON and use the sub power
the Power button of the remote control to turn the power on and off.
The indicating lamp lights when the power is turned on.
Indicating lamp
Lit in red
Lit or flickering in green
When the indicating lamp blinks in green or the message "POWER
SAVE" or "OUT OF FREQUENCY" appears on the screen, there is
something unusual about the status of reception. See "Symptoms
That Seemingly Appear to be Failures."
Avoid repeatedly turning the monitor on and off at short time intervals.
Turn off the main power switch ( ) before leaving the monitor out of
TIPS
use for an extended period of time.
If a power failure occurs while the set is running, it would be powered
on upon recovery from the failure. Turn off the unit main power switch
before leaving the set.
Power status
OFF
ON
26
Failures might result from such operation.
button
or
Main power
switch
POWER
Set unit
Remote
controller
13