Rotary - Boss GX-100 Parameter Manual

ROTARY

This produces an effect like the sound of a rotary speaker.
Parameter Value
ON/OFF OFF, ON
SLOW,
SPEED SELECT
FAST
0–100, BPM
ŀ–Ō
SLOW RATE
0–100, BPM
ŀ–Ō
FAST RATE
EFFECT LEVEL 0–100
0–100
RISE TIME
0–100
FALL TIME
MIC 0–100
DISTANCE
100:0–
ROTOR/HORN
0:100
DRIVE 0–100
DIRECT MIX 0–100
40–250
BPM
Chain
Turns this effect on/off.
This parameter changes the simulated speaker's rotating speed (SLOW or FAST).
This parameter adjusts the SPEED SELECT of rotation when set to "SLOW".
* When set to BPM, the value of each parameter will be set according to the value of the
"MASTER BPM" specified for each memory. This makes it easier to achieve effect sound
settings that match the tempo of the song.
* If, due to the tempo, the time is longer than the range of allowable settings, it is then
synchronized to a period either 1/2 or 1/4 of that time.
This parameter adjusts the SPEED SELECT of rotation when set to "FAST".
* When set to BPM, the value of each parameter will be set according to the value of the
"MASTER BPM" specified for each memory. This makes it easier to achieve effect sound
settings that match the tempo of the song.
* If, due to the tempo, the time is longer than the range of allowable settings, it is then
synchronized to a period either 1/2 or 1/4 of that time.
Adjusts the volume.
This parameter adjusts the time it takes for the rotation SPEED SELECT to change when switched
from "SLOW" to "FAST".
This parameter adjusts the time it takes for the rotation SPEED SELECT to change when switched
from "FAST" to "SLOW".
Adjusts the distance between the horn/rotor and the mic.
Adjusts the volume balance between the horn and rotor.
Adjusts the amount of distortion in the preamp.
Adjusts the volume of the direct sound.
Adjusts the BPM value for each memory.
* BPM (beats per minute) indicates the number of quarter note beats that occur each minute.
* When you have an external MIDI device connected, the MASTER BPM synchronizes to the
external MIDI devices tempo, making it impossible to set the MASTER BPM. To enable setting
of the MASTER BPM, set "SYNC CLOCK" to "INTERNAL".
Palette
Explanation
EFFECTS
27