Advertisement
Remote Control Guide
Resetting your system
Resetting the system is sometimes necessary to restore any customizations on the preset buttons to its factory settings.
On the remote control, press and hold the
On the remote control, press and hold the Program
for 2.5 seconds until the remote backlight flashes.
for 2.5 seconds until the remote backlight flashes.
All customized settings on the remote control are now restored to their
All customized settings on the remote control are now restored to their
default settings.
default settings.
Special Functions
Using the mounted USB ports
The convenient USB ports located on each side of your adjustable
bed provide easy access for charging today's tech devices.
Activating the emergency power down feature
The power supply unit on your adjustable bed supports the emergency power down feature if a power failure occurs
while the head, lumbar, and/or foot sections are raised.
NOTE: Install the 9V batteries in the power supply unit only during a power failure when the emergency power down
NOTE:
Install the 9V batteries in the power supply unit only during a power failure when the emergency power down
function is needed.
function is needed.
1
Locate and remove the cover on the 9V battery compartment in
Locate and remove the cover on the 9V battery compartment in
the power supply unit.
the power supply unit.
2
Install two (2) alkaline 9V batteries (not included with the
Install two (2) alkaline 9V batteries (not included with the
adjustable bed). Replace the battery cover.
adjustable bed). Replace the battery cover.
3
When the 9V batteries are installed and a power failure occurs,
When the 9V batteries are installed and a power failure occurs,
press the Flat
press the
Flat button on the remote control for the bed to return
button on the remote control for the bed to return
to a flat position.
to a flat position.
NOTE: The 9V batteries are for single use only. After lowering the
NOTE:
The 9V batteries are for single use only. After lowering the
adjustable bed once during a power failure, replace with a new
adjustable bed once during a power failure, replace with a new
set of batteries.
set of batteries.
Program and
and Flat
Flat buttons
buttons
13
Hide quick links:
Advertisement
Need help?
Do you have a question about the POWER BASE 900 and is the answer not in the manual?
Questions and answers
How do I pair my remote with my 900 base? There is no reset button on the power box or control module
To pair the remote with the MATTRESS FIRM POWER BASE 900, follow these steps:
1. Press and hold the Flat and Massage Stop buttons on the remote for 4 seconds.
2. If pairing is successful, the LED light on the control box turns green immediately.
3. If pairing fails, the LED light stays blue and turns green only after a 20-second timeout.
4. Repeat the process until pairing is successful.
This answer is automatically generated
The light used to turn offf after a few seconds but now stays on. How do I change this
To turn off the under-bed light on the MATTRESS FIRM POWER BASE 900, press and hold the Under Bed Light button on the remote control.
This answer is automatically generated