Service Points - Hitachi CP-X960WA Service Manual

6. Service points

6 - 1 POINT
• Cautions when removing the Upper case
In the Upper case, an operation PWB is installed. When removing, lift carefully without using excessive force to
prevent damaging the ESW1 and ESW2 connector.
• Cautions when removing the main PWB
When removing the main PWB, there is danger of damaging the connector connecting the drive PWB. Lift up the
part near the main PWB connector and disconnect the connector before removing the main PWB.
PWB Ass'y main
• Before Replacing the LCD / Lens Prism
You should not replace separately the parts of the liquid crystal LCD / Lens Prism because it works properly only
when used together. Therefore, regarding these parts, you can either replace part , LCD / Lens Prism Ass'y, or
send the whole unit LCD / Lens Prism Ass'y back to Hitachi, where we will replace the malfunctioning part,
recondition the device and send it back to you. In that case please contact our distributor.
DISTRIBUTOR
• Do not disassemble the unit
because replacement of
separate parts is not possible.
• For repairs of the product,
please contact our distributor.
Return
– 21 –
ESW2
CNSW
ESW1
Connector
HITACHI
Replacement of G Panel
CP-X960WA
CP-X970W
G Panel
Reconditioning