Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Hitachi CPX940E
Summary of Contents for Hitachi CPX940E
- Page 2 -1 About Trademarks VGA and XGA are trademarks of IBM (International Business Machines Corporation). Macintosh is registered trademark of Apple Computer Corporation of the U.S. VESA and SVGA are trademarks or registered trademarks of Video Electronics Standards association. Q Windows95 and Windows98 are registered trademarks of Microsoft Corporation in the U.S. and other countries. Carefully observe the trademarks and registered trademarks of all companies, even when not mentioned.
- Page 3 [Safety precaution] Do not look directly at the lens when If any abnormality occurs. the lamp is lit. When there is an abnormal smell or smoke, if you use this unit as it is, this could cause a fire Do not look directly at the lens when or electric shock, etc.
-
Page 4: Before Use
WARNING:This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. -
Page 5: High Temperatures
E --- High temperatures are generated when the lamp is lit, so do not place objects in front of the lens. E Be careful in handling the power cord. Do not scratch, damage or process the power . If the cord is damaged (core wire is cord. - Page 6 H Do not placethis unit in a moistor dusty place. E Do not step on this unit or do not put a Do not place this unit in a moist or dusty place. heavy object on it. It may cause a fu-e, electric shock, etc. Do not step on this unit.
- Page 7 9 Caution when replacing the lamp. Use of batteries. When replacing the lamp, turn off the power of Do not use batteries not specified the projector and disconnect the power plug ffom for this unit. Do not use new — the power outlet.
-
Page 8: Contents Of Shipping Box
Contents of shipping box Check that the carton contains the following items. .xMwiErnB ---- —- —~. —.-w —— -------- .—” — ~“ -.— — Liquid Crystal Projector Remote Control Remote Control Operating Guide Transmitter Batteries Power Cord 3-Conductor RGB Cable Mouse cable X3 Mec adapter Ilov-us... - Page 9 Names and functions of each part (continued) Remote control sensor MAIN POWER switch l!!v/ Main power ON/OF ‘F switch. 0: OFF [ :ON VIDEO input terminal (on video-equipped models only) S-VIDEO input terminal AC IN socket Mini DIN 4pin connector Connect the provided power cord.
-
Page 10: Remote Control Transmitter
Names and functions of each part (continued) Remote control transmitter MUTE button STANDBY /ON button == Silences the sound. (Cancels the mute when Power ON/OFF button. the unit is set in mute mode.) OFF sets the unit in standby mode. VOLUME button (See page 13, 14) volume. - Page 11 Names and functions of each part (continued) How to insert batteries Insert the provided batteries LR6 (alkali) into the remote control transmitter. Insert the batteries Remove the battery as illustrated inside compartment cover. the battery compartment. o — Replace the cover. Slide the battery compartment cover...
-
Page 12: Installation
Installation I Example of the projector and screen installation I Determine picture size and projection distance as illustrated below. View from the side View from the top Screen Lens center a:Distance from the projector to the screen. (tolerance : *1 O%) Screen (inch) This screen size is full-screen size.(1024 dots X 768 dots) Installation... -
Page 13: Basic Operations
Basic operations @&b@ To project the picture r STANDBY/ON MUTE FREEZE cmma MAGNIWVOLUME POSITION ON IASEI >9 RIGHT Turn the MAIN POWER switch of the projector on.[ I : ON] The ON indicator will light up orange. Press the STANDBY/ON button. -
Page 14: To Turn Off The Power
Basic operations (continued) @4i2h@ To turn off the power STANDBY/ON MUTE FREEZE )SITION LASE MOUSE ON’ [MENU BIANK TIMER VIDEO ~hWUT~ Press the STANDBY/Ohl button, for 1 second. The ON indicator blinks orange and the lamp turns off. (About 1 minute later), the fan stops and the indicator lights up orange. -
Page 15: Freeze Function
Basic operations (continued) FREEZE FUNCTION C9A@Y STANDBYION MUTE This function can display a still picture (by freezing). This function can be used in combination with a MAGNIN function. EElvg, ress the FREEZE button. - “ I!zl, The display image stops. A Ii mark appears at the lower right of POSITION ON USER the screen for about 3 seconds during the FREEZE function. -
Page 16: Adjustments And Functions
Adjustments and functions @lPKl ,(4I FREEZE o 00! Slmciwm O@Elm VOLUME MAGNIFY INPUT m3El MENU A <b POSITION ON USER 2,3A- RfSET RESET R1’dHT MENU ON MOUSE ON 1,2,3 ‘.X%23’ BLANK TIMER VIOEO ~INPUT~ Press the MENU ( @ @ @o) buttons or the MENU ON / OFF button. - Page 17 Adjustments and functions (continued) EmEl The menu SET UP serves for the change of parameters influencing the picture and for the move picture position. RGB signal input VIDEO signal input Magnify Details of adjustment Freeze Adjustment Item ~g;:$ VOLUME Decrease Increase BRIGHT Dark ~...
- Page 18 Adjustments and functions (continued) < AUTO-adjustment > The projector will automatically adjust four items (V POSIT, H POSIT, H PHASE, H SIZE, White level). When AUTO is selected (the cursor is moved from Manual Operation towards the right) the AUTO Confirm screen shown below will be displayed.
- Page 19 Adjustments and functions (continued) L!!!EEl The menu IMAGE serves of the picture inversion. — SETUP INPUT OPT. SETUP INPUT OPT. REVEAL FAST MESSAGE TURN MEOIUM SLOW Details of adjustment Adjustment [tern picture horizontally or vertically. Inverts invert. NORMAL MIRROR H: INVERT Inverts the picture horizontally.
-
Page 20: Connection To The Video Signal Terminals
Connection to the video signal terminals 1. Input signal Luminance signal 1.OVp-p, 75Q termination S-VIDEO signal Chrominance signal 0.286VP-P (burst signal), 75!2 termination VIDEO signal 1.OVp-p, 75S2 termination 200mVrms, 20kQ below (MAX 3. OVp-p) Input AUDIO signal output O-200mVrms, 1Id2 2. -
Page 21: Example Of Computer Signal
Connection to the RGB signal terminal(continued) 3. Example of computer signal Standard Note 1 Note 2 Note 3 Display Dots (I%z) Type 640 X 400 24.8 56.4 NEC PC9800 Expanded 1024 X 640 640 X 350 37.9 “ 85.1 VESA VGA-1 Expanded 1008 X 560... - Page 22 Connection to the RGB signa terminal(continued) 4. Initial set signals The following signals are initially set. The settings may be different depending on the computer type. In this case, adjust the settings referring to pages 16, 17. Back porch(b) Front porch(d) Active(c) DATA I+SYNC...
-
Page 23: Connection To The Control Signal Terminal
Connection to the control signal terminal 1. Control signal terminal Mouse Pin No. RS-232C PS12 Serial DATA DATA SELO 6[-]10 SELO SELO D-sub 15pin shrink terminal (Male) Turn off the power of both the projector and computer before connecting. Comect the computer to the control terminal of the projector using an appropriate cable. -
Page 24: Serial Mouse
Connection to the control signal terminal (continued) PS/2 mouse Projector Computer DATA Mini Din 6pin DATA SELO PS/2 cable ADB (Mac) mouse Projector Computer Mini Din 4pin (3C3 ‘n Serial mouse Projector Computer D-sub 9pin SELO Ez!9 Serial cable Communication via RS-232C cannot be operated with Serial mouse cable. -
Page 25: Control Command Table
Connection to the control signal terminal (continued) 3. Communication (1)cmmctthe projector and computer using RS 232C cable. computer and after computer is setting up, turn on the projector. TUITI off the (3) Select the data speed (COM.SPEED) and the data format (COM.BITS) of the projector. - Page 26 Connection to the control signal terminal (continued) Control data table “ Item Data code MOUSE IOh=stop mouse emulation. 01 -7 Fh=start mouse emulation lXh=8Nl , 1Xh=7Nl COMMUNICATE KOh=1200bps, Xl h=2400bps, X2h=4800bps, X3h=9600bps, X4h=l 9200bps POWER 3Eh=Power off(Standby mode),3Fh=Power MIRROR )Oh=Normal, Olh=H:lnvert, 02h=V:lnvert, 03h=H&V:lnvert INPUT...
- Page 27 Connection to the control signal terminal (continued) The procedure of getting the Projector status sends the command ‘20H’+’yyH’ to Projector. (1)Computer (2)Projector reply the command ‘lxH’+’yyH’+data bytes. The procedure of setting the Projector status (l)Computer sends the command ‘3xH’+’yyH’+data bytes. (2)Projector changes it’s status.
-
Page 28: Example Of System Setup
Example of system setup Connecting various equipment. AC Inlet Computer (Note type) Computer(Desk type) VTR, etc. (video model only) CRT Display Audio amplifying equipment... -
Page 29: Cleaning The Air Filter
Cleaning the air filter Clean filter 100 hours. the air about every Turn the main power switch off and disconnect the power plug from the power outlet. emove the front filter cover. ean the air filter using a vacuum cleaner. 3 c’... - Page 30 Lamp Light source lamp has a service life. The picture will become dark or color will be poor when the lamp is used for a long time. If usage of lamp is continued in such cases, it could cause a malfunction. Replace lamp with new one.
-
Page 31: Message Table
Lamp (continued) Install the lamp cover and fix it using screws. To prevent burn, install the lamp cover and secure it using the screws. . Do not turn on the power with lamp cover removed. Lamp cover “ Whenever the lamp is replaced, reset the total operation time of the lamp. Do not reset if the lamp has not been replaced. -
Page 32: Indicator Display
Message table (continued) Indicator display ~link i n,~,~OllO~in~ ~~~,, The ON indicator LAMP indicator and TEMP indicator will light or Remedy TEMP indicator Meaning ON indicator LAMP indicator mode Goes off Standby Lights orange Goes off Blinks green Goes off Goes off During warming During operation... -
Page 33: Specifications
Specifications specifications are subject to change without notice, Liquid crystal projector Product name Model name CP-X938WZ / CP-X940W/E/WB Display system 3 sheets of liquid crystal panels, 3 primary color lights shutter system 2.3cm (0.9 inchs) Panel size Liquid crystal Drive system TFT active matrix panel Number of pixels... - Page 34 Fax: +46 (0) 8 562 711 13 Tel: +39 02 38073415 Servizio Clienti Email: csgswe@hitachi-eu.com Fax: +39 02 48786381/2 Email: customerservice.italy@hitachi-eu.com HITACHI EUROPE S.A.S HITACHI EUROPE LTD (Norway) AB Lyon Office STRANDVEIEN 18 B.P. 45, 69671 BRON CEDEX 1366 Lysaker FRANCE...